BOOKS / JOURNAL SPECIAL ISSUES

 

B018 Yuan, P., Menges, A., Leach, N. (eds.): 2018, Digital Fabrication, Tongji University Press, Shanghai. (ISBN: 978-7560873343)
B017 Menges, A., Sheil, B., Glynn, R., Skavara, M. (eds): 2017, Fabricate – Rethinking Design and Construction, UCL Press, London. (ISBN 978 1 78735 000 7)
B016 Adriaenssens, S., Gramazio, F., Kohler, M., Menges, A., and Pauly, M. (eds.): 2016, Advances in Architectural Geometry 2016, vdf Hochschulverlag AG ETH Zurich, Zurich. (ISBN 978-3-7281-3778-4)
B015 Menges, A. (ed.): 2016, Material Performance – Fibrous Tectonics & Architectural Morphology, Harvard University GSD, Cambridge. (ISBN: 978-1-934510-57-5)
B014 Menges, A., Schwinn, T., Krieg, O. (eds.): 2016, Advancing Wood Architecture – A Computational Approach, Routledge, Oxford. (ISBN: 9781138932982)
B013 Menges, A. (ed.): 2015, Material Synthesis – Fusing the Physical and the Computational, Architectural Design, Vol. 85 No. 5, Wiley Academy, London. (ISBN: 978-1-118-87837-8)
B012 Yuan, P., Menges, A., Leach, N. (eds): 2015, Robotic Futures, Tongji University Press, Shanghai. (ISBN 978-7-5608-5845-6)
B011 Menges, A. (ed.): 2012, Material Computation – Higher Integration in Morphogenetic Design, Architectural Design, Vol. 82 No. 2, Wiley Academy, London. (ISBN: 978 0470973301)
B010 Menges, A., Ahlquist, S. (eds.): 2011, Computational Design Thinking, John Wiley and Sons, London. (ISBN 978-0470665701)
B009 Hensel, M., Menges, A., Weinstock, M.: 2010. Emergent Technologies and Design. Routledge, Oxford. (ISBN 978-0415493437)
B008 Hensel, M., Hight, C., Menges, A. (eds.): 2009, Space Reader: Heterogeneous Space in Architecture, John Wiley and Sons, London. (ISBN 978-0470519424)
B007 Hensel, M., Menges, A. (eds.): 2008, Form Follows Performance: Zur Wechsel-wirkung von Material, Struktur, Umwelt, ArchPlus No. 188, ArchPlus Verlag, Aachen. (ISSN 05873452)
B006 Menges, A. (ed.): 2008, Systemisches Denken und Integrales Entwerfen – System Thinking and Integral Design, Hochschulverlag HFG Offenbach, Offenbach. (ISBN: 978-3921997697)
B005 Hensel, M., Menges, A. (eds.): 2008, Versatility and Vicissitude: Performance in Morpho-Ecological Design, Architectural Design Vol. 78 No. 2, Wiley Academy, London. (ISBN: 978-0470516874)
B004 Hensel, M., Kamvari, O., Menges, A. (eds.): 2008, Performance-Oriented Design: Morpho-Ecological Design, Research and Practice in Architecture, Iranian Architecture Quarterly Vol. 8 No. 31 & 32, Iranian Architecture Publications, Teheran.
B003 Hensel, M., Menges, A. (eds.): 2006, Morpho-Ecologies, AA Publications, London, 376 pages. (ISBN: 190290253X)
B002 Hensel, M., Menges, A., Weinstock, M. (eds.): 2006, Techniques and Technologies in Morpho-genetic Design, Architectural Design, Vol. 76 No. 2, Wiley Academy, London. (ISBN: 0470015292)
B001 Hensel, M., Menges, A., Weinstock, M. (eds.): 2004, Emergence – Morphogenetic Design Strategies, Architectural Design, Vol. 74 No. 3, Wiley Academy, London. (ISBN: 0-470-86688-8)

 

PEER REVIEWED PAPERS

 

2018  
P147 Wood, D., Vailati, C., Menges, A., Rüggeberg, M.: 2018, Hygroscopically actuated wood elements for weather responsive and self-forming building parts – Facilitating upscaling and complex shape changes, Construction and Building Materials, Volume 165, Elsevier. (DOI: 10.1016/S0950061817325394)
P146 Felbrich, B., Wulle, F., Allgaier, C., Menges, A., Verl, A., Wurst, K., Nebelsick, J.: 2018, A novel Rapid Additive Manufacturing concept for architectural composite shell construction inspired by the shell formation in land snails, in Bioinspiration & Biomimetics, Bristol. (DOI 10.1088/1748-3190/aaa50d)
2017  
P145 Melenbrink, N., Michalatos, P., Kassabian, P., Werfel, J.: 2017, Using Local Force Measurements to Guide Construction by Distributed Climbing Robots, in IROS [Proceedings of the IEEE/RSJ International Conference on Intelligent Robots and Systems 2017], Vancouver, BC, Canada. pp. 4333 – 4340. (ISBN: 978-1-5386-2682-5 DOI: 10.1109/IROS.2017.8206298)
P144 Melenbrink, N., Werfel, J.: 2017, Local Force Cues for Strength and Stability in a Distributed Robotic Construction System. Swarm Intelligence, Volume 11, Special Issue on Self-Organised Construction, Springer US. pp. 1-25. (DOI: 10.1007/s11721-017-0149-2)
P143 Groenewolt, A., Schwinn, T., Nguyen, L., Menges, A.: 2017, An interactive agent-based framework for materialization-informed architectural design. Swarm Intelligence, Volume 11, Special Issue on Self-Organised Construction, Springer. (DOI: 10.1007_s11721-017-0151-8)
P142 Grun, T.B., von Scheven, M., Geiger, F., Schwinn, T., Sonntag, D., Bischoff, M., Knippers, J., Menges, A., Nebelsick, J.H.: 2017, Bauprinzipien und Strukturdesign von Seeigeln – Vorbilder für Bioinspirierte Konstruktionen, in Knippers, J., Schmid, U., Speck T. (eds.), Baubionik: Biologie beflügelt Architektur. Stuttgarter Beiträge zur Naturkunde, Serie C, Band 82, Stuttgart: Naturkundemuseum Stuttgart, pp 82-93. (ISSN: 0341-0161)
P141 Allgaier, C., Felbrich, B., Wulle, F., Khechine, E., Nebelsick, J., Menges, A., Reiter, G., Reiter, R., Lechler, A., Verl, A., Wurst, K.: 2017, Schnecken als lebende 3D-Drucker: freie Formen für die Architektur von morgen, in Knippers, J., Schmid, U., Speck T. (eds.), Baubionik: Biologie beflügelt Architektur. Stuttgarter Beiträge zur Naturkunde, Serie C, Band 82, Stuttgart: Naturkundemuseum Stuttgart, pp 94-101. (ISSN: 0341-0161)
P140 Malkowsky, Y., Ostendorf, A., Gessel, N., Nguyen, L., Lang, D., Menges, A., Roth-Nebelsick, A., Reski, R.: 2017, Evolutive Ansätze für explorative Entwurfsmethoden in der Architektur, in Knippers, J., Schmid, U., Speck T. (eds.), Baubionik: Biologie beflügelt Architektur. Stuttgarter Beiträge zur Naturkunde, Serie C, Band 82, Stuttgart: Naturkundemuseum Stuttgart, pp 102-108. (ISSN: 0341-0161)
P139 Felbrich, B., Früh, N., Prado, M., Saffarian, S., Solly, J., Vasey, L., Knippers, J., Menges, A.: 2017, Multi-Machine Fabrication: An Integrative Design Process Utilising an Autonomous UAV and Industrial Robots for the Fabrication of Long-Span Composite Structures, in ACADIA – Disciplines & Disruption [Proceedings of the ACADIA Conference 2017], Cambridge, MA, pp. 248-259. (ISBN: 978-0-692-96506-1)
P138 Dierichs, K., Wood, D., Correa, D., Menges, A.: 2017, Smart Granular Materials: Prototypes for Hygroscopically Actuated Shape-Changing Particles, in ACADIA – Disciplines & Disruption [Proceedings of the ACADIA Conference 2017], Cambridge, MA, pp. 222-231. (ISBN: 978-0-692-96506-1)
P137 Melenbrink, N., Kassabian, P., Menges, A., Werfel, J.: 2017, Towards Force-aware Robot Collectives for On-site Construction, in ACADIA – Disciplines & Disruption [Proceedings of the ACADIA Conference 2017], Cambridge, MA, pp. 382-391. (ISBN: 978-0-692-96506-1)
P136 De Micoli, S., Rinderspacher, K., Menges, A.: 2017, Stone Morphologies: Erosion-Based Digital Fabrication Through Event-Driven Control, in Humanizing Digital Reality [Proceedings of the Design Modelling Symposium 2017], Paris, pp.102-112. (DOI 10.1007/978-981-10-6611-5_11)
P135 Poppinga, S., Zollfrank, C., Prucker, O., Rühe, J., Menges, A., Cheng, T., Speck, T.: 2017, Toward a New Generation of Smart Biomimetic Actuators for Architecture. Advanced Materials. (DOI: 10.1002/adma.201703653)
P134 Dierichs, K. and Menges, A: 2017, Granular Construction: Designed Particles for Macro-Scale Architectural Structures, Architectural Design, Vol. 87 No. 4, Wiley, London, pp. 88–93. doi:10.1002/ad.2200
P133 Barés, J., Zhao, Y., Renouf, M., Dierichs, K., Behringer, R.: 2017, Structure of Hexapod 3D Packings: Understanding the Global Stability from the Local Organization, in EPJ Web Conf 140, S. 06021. (DOI: 10.1051/epjconf/201714006021)
P132 Zhao, Y., Ding, J., Barés, J., Zheng, H., Dierichs, K., Menges, A., Behringer, R.: 2017, Vibrational Collapse of Hexapod Packings, in EPJ Web Conf 140, S. 06011. (DOI: 10.1051/epjconf/201714006011)
P131 Yablonina, M., Prado, M., Baharlou, E., Schwinn, T., Menges, A.: 2017, Mobile Robotic Fabrication System For Filament Structures, in Fabricate – Rethinking Design and Construction [Proceedings of the Fabricate Conference 2017], Stuttgart, pp. 202-209. (ISBN: 978 1 78735 001 4; JSTORE: j.ctt1n7qkg7.32)
P130 Correa, D., Menges, A.: 2017, Fused Filament Fabrication for Multi-Kinematic-State Climate Responsive Apertures, in Fabricate – Rethinking Design and Construction [Proceedings of the Fabricate Conference 2017], Stuttgart, pp. 190–195. (ISBN: 978 1 78735 001 4; JSTORE: j.ctt1n7qkg7.30)
P129 Prado, M., Doerstelmann, M., Solly, J., Menges, A., Knippers, J.: 2017, Elytra Filament Pavilion: Robotic Filament Winding for Structural Composite Building Systems, in Fabricate – Rethinking Design and Construction [Proceedings of the Fabricate Conference 2017], Stuttgart, pp. 224–233. (ISBN: 978 1 78735 001 4; JSTORE: j.ctt1n7qkg7.35)
2016  
P128 Grun, T. B., Koohi Fayegh Dehkordi, L., Schwinn, T., Sonntag, D., von Scheven, M., Bischoff, M., Knippers, J., Menges, A., Nebelsick, J. H.: 2016, The Skeleton of the Sand Dollar as a Biological Role Model for Segmented Shells in Building Construction: A Research Review. In J. Knippers, K. G. Nickel, & T. Speck (Eds.), Biomimetic Research for Architecture and Building Construction: Biological Design and Integrative Structures (Vol. 8), Cham: Springer International Publishing, pp. 217–242. (DOI: 10.1007/978-3-319-46374-2_11)
P127 Nebelsick, J. H., Allgaier, C., Felbrich, B., Coupek, D., Reiter, R., Reiter, G., Menges, A., Lechler, A., Wurst, K.: 2016, Continuous Fused Deposition Modelling of Architectural Envelopes Based on the Shell Formation of Molluscs: A Research Review. In J. Knippers, K. G. Nickel, & T. Speck (Eds.), Biomimetic Research for Architecture and Building Construction: Biological Design and Integrative Structures (Vol. 8). Cham: Springer International Publishing, pp. 243–260. (DOI: 10.1007/978-3-319-46374-2_12)
P126 Nguyen, L., Lang, D., van Gessel, N., Beike, A. K., Menges, A., Reski, R., Roth-Nebelsick, A.: 2016, Evolutionary Processes as Models for Exploratory Design. In J. Knippers, K. G. Nickel, & T. Speck (Eds.), Biomimetic Research for Architecture and Building Construction: Biological Design and Integrative Structures (Vol. 8). Cham: Springer International Publishing. pp. 295–318. (DOI: 10.1007/978-3-319-46374-2_15)
P125 Brugnaro, G., Baharlou E., Vasey, L. and Menges, A.: 2016, Robotic Softness: An Adaptive Robotic Fabrication Process for Woven Structures, in Posthuman Frontiers: Data, Designers, and Cognitive Machines, Proceedings of the 36th Conference of the Association for Computer Aided Design in Architecture (ACADIA), Ann Arbor, pp. 154-163.
P124 Rusenova, G., Dierichs, K., Baharlou E. and Menges, A.: 2016, Feedback- and Data-driven Design for Aggregate Architectures: Analyses of Data Collections for Physical and Numerical Prototypes of Designed Granular Materials, in Posthuman Frontiers: Data, Designers, and Cognitive Machines, Proceedings of the 36th Conference of the Association for Computer Aided Design in Architecture (ACADIA), Ann Arbor, pp. 62-72.
P123 Schwinn, T., Krieg, O., and Menges, A.: 2016, Robotic Sewing: A Textile Approach Towards the Computational Design and Fabrication of Lightweight Timber Shells, in Posthuman Frontiers: Data, Designers, and Cognitive Machines, Proceedings of the 36th Conference of the Association for Computer Aided Design in Architecture (ACADIA), Ann Arbor, pp. 224-233.
P122 Krieg, O., and Menges, A.: 2016, Digitaler Holzbau: Innovationen im Kontext Industrie 4.0, in Digitale Fertigung im Holzbau, Tagungsband 48. Fortbildungskurs S-WIN, Swiss Wood Innovation Network c/o Lignum, Zürich, pp. 31-36.
P121 Bechert, S., Knippers, J., Krieg, O., Menges, A., Schwinn, T., and Sonntag, D.: 2016, Textile Fabrication Techniques for Timber Shells: Elastic Bending of Custom-Laminated Veneer for Segmented Shell Construction Systems, in Adriaenssens, S., Gramazio, F., Kohler, M., Menges, A., and Pauly, M. (Eds.), Advances in Architectural Geometry 2016, vdf Hochschulverlag AG ETH Zurich, Zurich, pp. 154-169. (ISBN 978-3-7281-3778-4)
P120  Dierichs, K., Menges A.: 2016, Towards an aggregate architecture: designed granular systems as programmable matter in architecture, Granular Matter, 18 (25), DOI: 10.1007/s10035-016-0631-3.
P119 Zhao, Y., Liu, K., Zheng, M., Bares, J., Dierichs, K., Menges, A., Behringer, R.P.: 2016, Packings of 3D stars: stability and structure, Granular Matter, 18 (24), DOI: 10.1007/s10035-016-0606-4.
P118 Menges, A.: 2016, Computational Material Culture, Architectural Design, Vol. 86 No. 2, Wiley, London, pp. 76-83. (ISBN 978-1118736166; DOI: 10.1002/ad.2027)
P117 Wood, D. , Correa, D., Krieg, O., Menges, A.: 2016. Material computation – 4D timber construction: towards building-scale hygroscopic actuated, self-constructing timber surfaces. International Journal of Architectural Computing (IJAC), Vol. 14(1), 49-62. DOI: 10.1177/1478077115625522
2015  
P116 Baharlou, E., Menges, A.: 2015, Toward a Behavioral Design System. An Agent-Based Approach for Polygonal Surfaces Structures, in Combs, L. and Perry, C. (Eds.), Computational ecologies: Design in the anthropocene, Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA), University of Cincinnati, Cincinnati OH, pp. 161–172. (ISBN 978-0-69253-726-8)
P115 Vasey, L., Baharlou, E., Dörstelmann, M., Koslowski, V., Prado, M., Schieber, G., Menges, A., Knippers, J.: 2015, Behavioral Design and Adaptive Robotic Fabrication of a Fiber Composite Compression Shell with Pneumatic Formwork, in Combs, L. and Perry, C. (Eds.), Computational ecologies: Design in the anthropocene, Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA), University of Cincinnati, Cincinnati OH, pp. 297–309. (ISBN 978-0-69253-726-8)
P114 Angelova, D., Dierichs, K., Menges, A.: 2015, Graded Light in Aggregate Structures – Modelling the Daylight in Designed Granular Systems Using Online Controlled Robotic Processes, in Martens, B., Wurzer, G., Grasl, T. Lorenz, W., Schaffranek, R. (eds.), Real Time – Proceedings of the 33rd eCAADe Conference – Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 399-406.
P113 Topic, N., Pöschel, T., Dierichs, K., Menges, A.: 2015, Packings of Complex Shaped Particles in Cylinders, in Proceedings of the Particle Simulations Conference 2015, Erlangen, pp. 53-94.
P112 Dierichs, K., Menges, A.: 2015, Non-convex Designed Aggregates as Architectural Material Systems, in Proceedings of the Particle Simulations Conference 2015, Erlangen, pp. 96-97.
P111 Schieber, G., Koslowski, V., Dörstelmann, M., Prado, M., Vasey, L., Knippers, J., Menges A.: 2015, Integrated design and fabrication strategies for fibrous structures, in Ramsgaard Thomsen, M., Tamke, M., Gengnagel, C., Faircloth, B., Scheurer, F. (eds.): 2015 Modelling Behaviour – Proceedings of the Design Modelling Symposium Copenhagen 2015, Copenhagen, Denmark, Springer, Heidelberg, London, New York, pp 237-246. (ISBN: 978-3-319-24206-4, DOI: 10.1007/978-3-319-24208-8_20)
P110 Dierichs, K., Angelova, D., Menges, A.: 2015, Modelling Aggregate Behaviour, in Ramsgaard Thomsen, M., Tamke, M., Gengnagel, C., Faircloth, B., Scheurer, F. (eds.): 2015 Modelling Behaviour – Proceedings of the Design Modelling Symposium Copenhagen 2015, Copenhagen, Denmark, Springer, Heidelberg, London, New York, pp. 5-15.  (ISBN: 978-3-319-24206-4, DOI: 10.1007/978-3-319-24208-8_1)
P109 Correa, D., Papadopoulou, A., Guberan, C., Jhaveri, N., Reichert, S., Menges, A., and Tibbits, S. : 2015, 3D Printed Wood: Programming Hygroscopic material transformation. 3D Printing and Additive Manufacturing, Volume 2, No.3, Mary Ann Liebert. pp. 106-116. DOI: 10.1089/3dp.2015.0022
P108 Correa, D. Menges, A.:2015, 3D Printed Hygroscopic Programmable Material Systems, in Sabin, J., Gutierrez, P., Santangelo, C., Materials Research Society Proceedings Vol 1800, Cambridge University Press, mrss15-2134303. DOI:10.1557/opl.2015.644.
P107 Menges, A.: 2015, The New Cyber-Physical Making in Architecture – Computational Construction, Architectural Design, Vol. 85 No. 5, Wiley, London, pp. 28-33. (ISBN 978-11118878378; DOI: 10.1002/ad.1950)
P106 Menges, A., Knippers, J.: 2015, Fibrous Tectonics, Architectural Design, Vol. 85 No. 5, Wiley, London, pp. 40-47.  (ISBN 978-11118878378; DOI: 10.1002/ad.1952)
P105 Knippers, J., La Magna, R., Menges, A., Reichert, S., Schwinn, T., Weimar, F.: 2015, ICD/ITKE Research Pavilion 2012 – Coreless Filament Winding on the Morphological Principles of an Arthropod Exoskeleton, Architectural Design, Vol. 85 No. 5, Wiley, London, pp. 48 -53. (ISBN 978-11118878378; DOI: 10.1002/ad.1953)
P104 Doerstelmann, M., Knippers, J., Menges, A., Parascho, S.,Prado, M., Schwinn, T.: 2015, ICD/ITKE Research Pavilion 2013-14 – Modular Coreless Filament Winding Based on Beetle Elytra, Architectural Design, Vol. 85 No. 5, Wiley, London, pp. 54 -59. (ISBN 978-11118878378; DOI: 10.1002/ad.1954)
P103 Doerstelmann, M., Knippers, J., Koslowski, V., Menges, A., Prado, M.,Schieber, G., Vasey, L.: 2015, ICD/ITKE Research Pavilion 2014-15 – Fibre Placement on a Pneumatic Body Based on a Water Spider Web, Architectural Design, Vol. 85 No. 5, Wiley, London, pp. 60 – 65. (ISBN 978-11118878378; DOI: 10.1002/ad.1955)
P102 Menges, A., Reichert, S.: 2015, Performative Wood – Physically Programming the Responsive Architecture of the HygroScope and HygroSkin Projects, Architectural Design, Vol. 85 No. 5, Wiley, London, pp. 66-73. (ISBN 978-11118878378; DOI: 10.1002/ad.1956)
P101 Dierichs, K., Menges, A.: 2015, Granular Morphologies – Programming Material Behaviour with Designed Aggregates, Architectural Design, Vol. 85 No. 5, Wiley, London, pp. 86-91. (ISBN 978-11118878378; DOI: 10.1002/ad.1959)
P100 Schwinn, T., Menges, A.: 2015, Fabrication Agency – Landesgartenschau Exhibition Hall, Architectural Design, Vol. 85 No. 5, Wiley, London, pp. 92-99. (ISBN 978-11118878378; DOI: 10.1002/ad.1960)
p099 Baudy, B., Koehl, S., Menges, A., Reichert, S.: 2015, Computational Design and Automotive Material Gestalt – Cross-disciplinary Design Research by the Mercedes-Benz Center of Advanced Design and the Institute for Computational Design, Architectural Design, Vol. 85 No. 5, Wiley, London, pp. 114-121. (ISBN 978-11118878378; DOI: 10.1002/ad.1963)
P098 Krieg, O., Schwinn, T., Menges, A.: 2015, Neue Holztechnologien: Robotisch gefertigter Leichtbau, in holztechnologie, 2/2015, pp.20-26. (ISSN 0018-3881)
P097 Parascho, S., Dörstelmann, M., Prado, M., Menges, A. and Knippers, J.: 2015, Modular Fibrous Morphologies: Computational Design, Simulation and Fabrication of Differentiated Fibre Composite Building Components, in Block, P., Knippers, Mitra, N., Wang, W. (eds.), Advances in Architectural Geometry 2014, Springer International Publishing, pp.109-125. (DOI: 10.1007/978-3-319-11418-7_1, Print ISBN: 978-3-319-11417-0, Online ISBN: 978-3-319-11418-7)
P096 Krieg, O., Schwinn, T., Menges, A., Li, J., Knippers, J., Schmitt, A., Schwieger, V.: 2015, Biomimetic Lightweight Timber Plate Shells: Computational Integration of Robotic Fabrication, Architectural Geometry and Structural Design, in Block, P., Knippers, Mitra, N., Wang, W. (eds.), Advances in Architectural Geometry 2014, Springer International Publishing, pp.109-125. (DOI: 10.1007/978-3-319-11418-7_8, Print ISBN: 978-3-319-11417-0, Online ISBN: 978-3-319-11418-7)
P095 Dierichs, K., Menges, A.: 2015, Simulation of Aggregate Structures in Architecture: Distinct-Elelement Modeling of Synthetic Non-Convex Granulates, in Block, P., Knippers, Mitra, N., Wang, W. (eds.), Advances in Architectural Geometry 2014, Springer International Publishing, pp. 1-13. (DOI: 0.1007/978-3-319-11418-7_1, Print ISBN: 978-3-319-11417-0, Online ISBN: 978-3-319-11418-7)
P094 Reichert, S., Menges, A., Correa, D.: 2015, Meteorosensitive Architecture: Biomimetic Building Skins Based on Materially Embedded and Hygroscopically Enabled Responsiveness, CAD Journal, Elsevier, Volume 60, March 2015, pp. 50-69. doi: 10.1016/j.cad.2014.02.010 (ISSN 0010-4485)
P093 Ahlquist, S., Kampowski, T., Torghabehi, O., Menges, A., Speck, T.: 2015, Digital framework for the computation of complex material and morphological behavior of biological and technological systems – development of analytical and generative spring based methods for biomimetic research and design, CAD Journal, Volume 60, March 2015, pp. 84-104. doi: 10.1016/j.cad.2014.01.013 (ISSN 0010-4485)
2014  
P092 Dörstelmann, M., Parascho, S., Prado, M., Menges, A., Knippers, J. : 2014, Integrative Computational Design Methodologies for Modular Architectural Fiber Composite Morphologies, in Design Agency [Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)], Los Angeles, pp. 219–228. (ISBN 9781926724478)
P091 Schwinn, T., Krieg, O., Menges, A.: 2014, Behavioral Strategies: Synthesizing Design Computation and Robotic Fabrication of Lightweight Timber Plate Structures, in Design Agency [Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)], Los Angeles, pp. 177–188. (ISBN 978-1926724478)
P090 Prado, M., Dörstelmann, M., Schwinn, T., Menges, A., Knippers, J.: 2014, Coreless Filament Winding: Robotically Fabricated Fiber Composite Building Components, in McGee, W., Ponce de Leon,M.(eds.), Proceedings of the Robots in Architecture Conference 2014, University of Michigan, pp. 275-289. (ISBN 9783319046624)
P089 Kuma, T., Dörstelmann, M., Prado, M., Menges, A.: 2014, Integrative Computational Design Methodology for Composite Spacer Fabric Architecture, in Thompson, E., Emine, M.(eds.), Fusion – Proceedings of the 32nd eCAADe Conference, Vol. 2, Northumbria University, pp. 283-292. (ISBN 9789491207075)
P088 Yunis, L., Kyjanek, O., Dörstelmann, M., Prado, M., Schwinn, T., Menges, A.: 2014, Bio-inspired and fabrication-informed design strategies for modular fibrous structures in architectur, in Thompson, E., Emine, M.(eds.), Fusion – Proceedings of the 32nd eCAADe Conference, Vol. 1, Northumbria University, pp. 283-292. (ISBN 9789491207075)
P087 Krieg, O., Christian, Z., Correa, D., Menges, A., Reichert, S., Rinderspacher, K., Schwinn, T.: 2014, HygroSkin: Meteorosensitive Pavilion, in Gramazio, F., Kohler, M., Langenberg, S. (eds.), Fabricate: Negotiating Design and Making, Zürich, pp. 272-279. (ISBN 978-3-85676-331-2)
P086 Reichert S., Schwinn, T., La Magna, R., Waimer, F., Knippers, J., Menges, A.: 2014, Fibrous Structures: An integrative approach to design computation, simulation and fabrication for Lightweight, Glass and Carbon Fibre Composite Structures in Architecture based on Biomimetic Design Principles, CAD Journal, Elsevier, Volume 52, July 2014, pp. 27–39, DOI: 10.1016/j.cad.2014.02.005 (ISSN 0010-4485)
P085 Irlwek, M., Menges, A.: 2014, Vergleich und Erweiterung von Horst Rittels Design Methodologie in Parametrischen Entwurfsprozessen, in Leopold, C. (ed.), Über Form und Struktur – Anforderungen an Geometrie, Springer Vieweg Wiesbaden, pp. 187-206. DOI: 10.1007/978-3-658-05086-3_15
P084 Menges, A.: 2014, Integration aus Form, Material und Struktur: Computerbasierte Morphogenese in der Architektur, in Leopold, C. (ed.), Über Form und Struktur – Anforderungen an Geometrie, Springer Vieweg Wiesbaden, pp. 33-50. DOI: 10.1007/978-3-658-05086-3_4
P083 Irlwek, M., Menges, A.: 2014, Applications of Design Methods in Parametric Processes as Extensions of Horst Rittel´s Methodological Treatments of Wicked Problems, Wicked Problems in Socio-Ecological Systems Symposium Conference Proceedings, University of California Berkeley, Forthcoming Publication.
2013  
P082 Waimer, F., La Magna, R., Reichert S., Schwinn, T., Menges, A., Knippers, J.: 2013, Bionisch-inspirierte Faserverbundstrukturen: Prinzipien für Fertigung und Auslegung, Bautechnik, Vol. 90 No. 12, pp. 766-771, DOI: 10.1002 / bate.201300079 (ISSN 1437-0999)
P081 Lienhard, J., Ahlquist, S., Menges, A., Knippers, J.: 2013, Finite element modelling in integral design strategies of form- and bending-active hybrid structures, in Bletzinger, K.-U., Kröplin, B. and Onate, E. (eds.), Structural Membranes – Proceedings of the VI International Conference on Textile Composites and Inflatable Structures, Munich, 2013, pp 39-50. (ISBN 978-84-941686-0-4)
P080 Lienhard, J., Ahlquist, S., Knippers, J., Menges, A.: 2013, Extending the Functional and Formal vocabulary of tensile membrane structures through the interaction with bending-active elements, in Bonger-Balz, H., Mollaert, M. and Pusa, E. (eds.), Proceedings of the TensiNet Symposium [Re]Thinking Lightweight Structures, Istanbul, 2013, pp 109-118. (ISBN 9789072325068)
P079 La Magna, R., Gabler, M., Reichert, S., Schwinn, T., Waimer, F., Menges, A., Knippers, J.: 2013, From Nature to Fabrication: Biomimetic Design Principles for the Production of Complex Spatial Structures, International Journal of Spatial Structures, Vol. 28 No. 01, pp. 27- 40. Doi: 10.1260/0266-3511.28.1.27 (ISSN 0266-3511)
P078 Baharlou, E., Menges, A.: 2013, Generative agent-based design computation: Integrating material formation and construction constraints, in Stouffs, R., Sariyildiz S.(eds.), Computation and Performance – Proceedings of the 31th eCAADe Conference, Vol. 2, Technical University of Delft, pp. 165-174. (ISBN 978-94-91207-05-1)
P077  Weigele, J., Schloz, M., Schwinn, T., Reichert S., La Magna, R., Waimer, F., Knippers, J., Menges, A.: 2013, Fibrous Morphologies, in Stouffs, R., Sariyildiz S.(eds.), Computation and Performance – Proceedings of the 31th eCAADe Conference, Vol.1, Technical University of Delft, pp. 549-558. (ISBN 978-94-91207-04-4)
P076 Parascho, S., Baur, M., Knippers, J., Menges, A.: 2013, Design Tools for Integrative Planning, in Stouffs, R., Sariyildiz S.(eds.), Computation and Performance – Proceedings of the 31th eCAADe Conference, Vol. 2, Technical University of Delft, pp. 237-246. (ISBN 978-94-91207-05-1)
P075 Ahlquist, S. , Menges, A., Lienhard, J., F., Knippers, J.: 2013, Textile Hybrid M1 at La Tour de l’Architecte – Research on Hybrid Form- and Bending Active Systems, TensiNews Newsletter of the European Based Network for the Design and Realisation of Tensile Structures, No. 04/2013, pp. 6-9. (ISSN 1784-5688)
P074 La Magna, R., Reichert S., Schwinn, T., Waimer, F., Knippers, J., Menges, A.: 2013, Carbon und Glasfaser vom Roboter gewickelt, Deutsches Ingenieurblatt, No. 05/2013, pp.12-15. (ISSN 0946-2422)
P073 Weimar, F., La Magna, R., Reichert, S., Schwinn, T., Knippers, J., Menges, A.: 2013, Integrated design methods for the simulation of fibre-based structures, in: Gengnagel, C., Kilian, A., Nembrini, J., Scheurer, F. (eds.), Rethinking Prototyping, Proceedings of the Design Modelling Symposium Berlin 2013, Verlag der Universität der Künste Berlin. pp. 277-290. (ISBN 978-3-89462-243-5)
P072 Ahlquist, S., Lienhard, J. Knippers, J., Menges, A.: 2013, M1 Textile Hybrid: Cumulative Physical and Numerical Prototyping for Integrated Bending- and Form-Active Structures, in: Gengnagel, C., Kilian, A., Nembrini, J., Scheurer, F. (eds.), Rethinking Prototyping, Proceedings of the Design Modelling Symposium Berlin 2013, Verlag der Universität der Künste Berlin. pp. 1-14. (ISBN 978-3-89462-243-5)
P071 Baharlou, E., Menges, A.: 2013, Behavioural prototyping: an approach to agent-based computational design driven by fabrication characteristics and material constraints, in: Gengnagel, C., Kilian, A., Nembrini, J., Scheurer, F. (eds.), Rethinking Prototyping, Proceedings of the Design Modelling Symposium Berlin 2013, Verlag der Universität der Künste Berlin. pp. 291-303. (ISBN 978-3-89462-243-5)
P070 Krieg, O., Menges, A.: 2013, Prototyping Robotic Production: Development of Elastically Bent Wood Plate Morphologies with Curved Finger Joint Seams, in: Gengnagel, C., Kilian, A., Nembrini, J., Scheurer, F. (eds.), Rethinking Prototyping, Proceedings of the Design Modelling Symposium Berlin 2013, Verlag der Universität der Künste Berlin. pp. 479-490. (ISBN 978-3-89462-243-5)
P069 Correa, D., Krieg, O., Menges, A., Reichert, S., Rinderspacher, K.: 2013, HygroSkin: A prototype project for the development of a constructional and climate responsive architectural system based on the elastic and hygroscopic properties of wood, in Beesley, P., Del Barrio, A., Khan, O., Stacey, M., van Overbeeke, E. (eds.), Proceedings of the 33nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) – Adaptive Architecture, Waterloo, pp. 33-42. (ISBN 978-1-926724-22-5)
P068 Krieg, O., Menges, A.,: 2013, Potentials of Robotic Fabrication in Wood Construction: Elastically Bent Timber Sheets with Robotically Fabricated Finger Joints, in Beesley, P., Del Barrio, A., Khan, O., Stacey, M., van Overbeeke, E. (eds.), Proceedings of the 33nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA ) – Adaptive Architecture, Waterloo, pp. 253-260. (ISBN 978-1-926724-22-5)
P067 Ahlquist, S., Menges, A.,: 2013, Frameworks for Computational Design of Textile Microarchitectures and Material Behavior in Forming Complex Forceactive Structures, in Beesley, P., Del Barrio, A., Khan, O., Stacey, M., van Overbeeke, E. (eds.), Proceedings of the 33nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) – Adaptive Architecture, Waterloo, pp. 281-292. (ISBN 978-1-926724-22-5)
P066 Dierichs, K., Menges, A.: 2013, Aggregate Architecture: Simulation models for synthetic non-convex granulates, in Beesley, P., Del Barrio, A., Khan, O., Stacey, M., van Overbeeke, E. (eds.), Proceedings of the 33nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) – Adaptive Architecture, Waterloo, pp. 301-310. (ISBN 978-1-926724-22-5)
P065 Parascho, S., Baur, M., Baharlou, E., Knippers, J., Menges, A.: 2013, Agent Based Model for the Development of Integrative Design Tools, in Beesley, P., Del Barrio, A., Khan, O., Stacey, M., van Overbeeke, E. (eds.), Proceedings of the 33nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) – Adaptive Architecture, Waterloo, pp. 429-430. (ISBN 978-1-926724-22-5)
P064 Irlwek, M., Menges, A.: 2013, Terminological Comparison of parametric design processes and Horst Rittel´s design methodology, in Sovreski, Z. V., Mokryš, M., Badura, S. Lieskovský,A. (ed.), Global Virtual Workshop Conference Proceedings, EDIS – Publishing Institution of the University of Zilina, Slovak Republic, pp. 276-283. (ISBN 978-80-554-0679-4)
P063 Schwinn, T., La Magna, R., Reichert, S., Waimer, F., Knippers, J., Menges, A.: 2013, Prototyping Biomimetic Structures for Architecture, in Stacey, M. (ed.), Prototyping Architecture: The Conference Papers, Building Centre Trust, London, 2013, pp 224-244. (ISBN 978-0-901919-17-5)
P062 Ahlquist, S., Lienhard, J., F., Knippers, J., Menges, A.: 2013, Exploring Materials Reciprocities for Textile-Hybrid Systems as Spatial Structures , in Stacey, M. (ed.), Prototyping Architecture: The Conference Papers, Building Centre Trust, London, 2013, pp 187-210. (ISBN 978-0-901919-17-5)
2012  
P061 Menges, A.: 2012. Biomimetic design processes in architecture: morphogenetic and evolutionary computational design, Bioinspiration and Biomimetics, Vol. 7(1), 015003. DOI: 10.1088/1748-3182/7/1/015003
P060 Menges, A.: 2012, Morphospaces of Robotic Fabrication – From theoretical morphology to design computation and digital fabrication in architecture, in Brell Cokcan, S., Braumann, J. (eds.), Proceedings of the Robots in Architecture Conference 2012, TU Vienna, Springer, Vienna, pp. 28-47. (ISBN 978-3709114643, DOI: 10.1007/978-3-7091-1465-0_3)
P059 Schwinn, T., Krieg, O., Menges, A.: 2012, Robotically Fabricated Wood Plate Morphologies – Robotic Prefabrication of a Biomimetic, Geometrically Differentiated Lightweight Finger Joint Timber Plate Structure, in Brell Cokcan, S., Braumann, J. (eds.), Proceedings of the Robots in Architecture Conference 2012, TU Vienna, Springer, Vienna, pp. 28-47. (ISBN 978-3709114643)
P058 Dierichs, K., Schwinn, T., Menges, A.: 2012, Robotic Pouring of Aggregate Structures – Responsive Motion Planning Strategies for Online Robot Control of Granular Pouring Processes with Synthetic Macro-Scale Particles, in Brell Cokcan, S., Braumann, J. (eds.), Proceedings of the Robots in Architecture Conference 2012, TU Vienna, Springer, Vienna, pp. 196-205. (ISBN 978-3709114643)
P057 Parascho S., Baur, M., Knippers, J., Menges, A.: 2012, Integrative Design Methods in Architecture: An agent-based Modelling Tool for Integrative Design, in Voyatzaki, M., Spiridonidis, C. (ed.), Proceedings of the Conference of Integrated Planning Processes 2012, MSA Muenster, pp. 221-233. (ISBN 978-2-930301-58-7)
P056 Knippers, J., Menges, A., Gabler, M., La Magna, R., Waimer, F., Reichert S., Schwinn, T.: 2012, From Nature to Fabrication: Biomimetic Design Principles for the Production of Complex Spatial Structures, in Hesselgren, L., Sharma, S., Wallner, J., Baldassini, N., Bompas, P., Raynaud, J. (eds.), Advances in Architectural Geometry 2012, Springer Wien New York, pp. 107-122. (ISBN 978-3-7091-1250-2)
P055 Schwinn, T., Krieg, O., Menges, A., Mihaylov, B., Reichert, S.: 2012, Machinic Morphospaces: Biomimetic Design Strategies for the Computational Exploration of Robot Constraint Spaces for Wood Fabrication, in Cabrinha, M., Johnson, J., Steinfeld, K. (eds.), Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA), San Francisco, pp. 157-168. (ISBN 978-1-62407-267-3)
P054 Dierichs, K., Menges, A.: 2012, Functionally Graded Aggregate Structures: Digital Additive Manufacturing with Designed Granulates, in Cabrinha, M., Johnson, J., Steinfeld, K. (eds.), Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA), San Francisco, pp. 295-304. (ISBN 978-1-62407-267-3)
P053 Krieg, O.D., Mihaylov, B., Schwinn, T., Reichert S., Menges, A.: 2012, Computational Design of Robotically Manufactured Plate Structures Based on Biomimetic Design Principles Derived from Clypeasteroida, in Achten, H., Pavlicek, J., Hulin, J., Matejdan, D. (eds.), Digital Physicality – Proceedings of the 30th eCAADe Conference, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 531-540. (ISBN 978-9-4912070-3-7)
P052 Dierichs, K., Menges, A.: 2012, Material and Machine Computation of Designed Granular Matter: Rigid-Body Dynamics Simulations as a Design Tool for Robotically-Poured Aggregate Structures Consisting of Polygonal Concave Particles, in Achten, H., Pavlicek, J., Hulin, J., Matejdan, D. (eds.), Digital Physicality – Proceedings of the 30th eCAADe Conference, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 711-719. (ISBN 978-9-4912070-3-7)
P051 Fleischmann, M., Menges, A.: 2012, Physics-Based Modeling as an alternative approach to geometrical constrain-modeling for the design of elastically-deformable material systems, in Achten, H., Pavlicek, J., Hulin, J., Matejdan, D. (eds.), Digital Physicality – Proceedings of the 30th eCAADe Conference, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 565-575. (ISBN 978-9-4912070-3-7)
P050 Ladurner, G., Gabler, M., Menges, A., Knippers, J.: 2012, Interactive Form-Finding for Biomimetic Fibre Structures: Development of a Computational Design Tool and Physical Fabrication Technique Based on the Biological Structure of the Lichen, in Achten, H., Pavlicek, J., Hulin, J., Matejdan, D. (eds.), Digital Physicality – Proceedings of the 30th eCAADe Conference, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 519-529. (ISBN 978-9-4912070-3-7)
P049 Dierichs, K., Menges, A.: 2012, Aggregate Architectures, Observing and Designing with Changeable Material Systems in Architecture, in Costa, X., Thorne, M. (eds), Change, Architecture, Education, Practices – Proceedings of the International ACSA Conference, Barcelona, Spain, 20-22 June 2012, pp. 463-468 (ISBN 978-0-935502-83-1)
P048 Irlwek, M. and Menges, A.: 2012, The extension of Rittel´s methodology in contemporary parametric design, International Journal of Design Sciences and Technology, Vol. 19 No 1, pp. 01-25. (ISSN 1630-7267)
P047 Menges, A.: 2012, Material Resourcefulness: Activating Material Information in Computational Design, Architectural Design, Vol. 82 No. 2, Wiley Academy, London. pp. 34-43. (ISBN: 978 0470973301)
P046 Fleischmann, M., Knippers, J., Lienhard, J., Menges, A. and Schleicher, S.: 2012, Material Behaviour: Embedding Physical Properties in Computational Design Processes, Architectural Design, Vol. 82 No. 2, Wiley Academy, London. pp. 44-51. (ISBN: 978 0470973301)
P045 Menges, A., Reichert, S.: 2012, Material Capacity: Embedded Responsiveness, Architectural Design, Vol. 82 No. 2, Wiley Academy, London. pp. 52-59. (ISBN: 978 0470973301)
P044 Ahlquist, S., Menges, A.: 2012, Physical Drivers: Synthesis of Evolutionary Developments and Force-Driven Design, Architectural Design, Vol. 82 No. 2, Wiley Academy, London. pp. 60-67. (ISBN: 978 0470973301)
P043 Dierichs, K., Menges, A.: 2012, Aggregate Structures: Material and Machine Computation of Designed Granular Substances, Architectural Design, Vol. 82 No. 2, Wiley Academy, London. pp. 74-81. (ISBN: 978 0470973301)
P042 Menges, A., Schwinn, T.: 2012, Manufacturing Reciprocities, Architectural Design, Vol. 82 No. 2, Wiley Academy, London. pp. 118-125. (ISBN: 978 0470973301)
2011  
P041 Busch, B., Ladurner, G., Baharlou, E., Menges, A.: 2011, Adaptive Structure: A Modular System for Generative Architecture, in Soddu, C. (ed.), XIV Generative Art – Proceedings of GA2011 International Conference. Rome, Italy: Politecnico di Milano, pp. 88-98. (ISBN 978-88-96610-14-5)
P040 Menges, A.: 2011, Simple Systems – Complex Capacities: Integrative Processes of Computational Morphogenesis in Architecture, TECHNE Journal of Technology for Architecture and Environment, No. 02/2011, pp. 68-77. (ISSN: 2239-0243)
P039 Ahlquist, S. and Menges, A.: 2011, Articulated Behavior: Computational Methods for the Generation and Materialization of Complex Force-Active Textile Morphologies, Proceedings of the Ambience’11 International Conference, Boras (Sweden) 28-30 November 2011, pp. 13-19. (ISBN 987-91-975576-8-9)
P038 Menges, A.: 2011, Integrative Design Computation: Integrating Material Behaviour and Robotic Manufacturing Processes in Computational Design for Performative Wood Constructions, Proceedings of the 31th Conference of the Association For Computer Aided Design In Architecture (ACADIA), Banff (Canada) 13-16 October 2011, pp 72-81. (ISBN 978-1613645956)
P037 Ahlquist, S. and Menges, A.: 2011, Behavior-based Computational Design Methodologies – Integrative Processes for Force Defined Material Structures, Integration through Computation, Proceedings of the 31th Conference of the Association For Computer Aided Design In Architecture (ACADIA), Banff (Canada) 13-16 October 2011, pp 82-89. (ISBN 978-1613645956)
P036 Fleischmann, M., Menges, A.: 2011, ICD/ITKE Research Pavilion: A case study of multi-disciplinary computational design. In Gengnagel, C., Kilian, A., Palz, N. and Scheurer, F. (eds.), Computational Design Modeling, Proceedings of the Design Modeling Symposium Berlin, Springer-Verlag, Berlin/Heidelberg, pp. 239-248. DOI: 10.1007/978-3-642-23435-4_27 (ISBN: 978-3642234347)
P035 Ahlquist, S. and Menges, A.: 2011, Integration of Behaviour-based Computational and Physical Models: Design Computation and Materialisation of Morphologically Complex Tension-Active Systems. In Gengnagel, C., Kilian, A., Palz, N. and Scheurer, F. (eds.), Computational Design Modeling, Proceedings of the Design Modeling Symposium Berlin, Springer-Verlag, Berlin/Heidelberg, pp. 259-266. DOI: 10.1007/978-3-642-23435-4_9 (ISBN: 978-3642234347)
P034 Krieg, O., Dierichs, K., Reichert, S., Schwinn, T. and Menges, A.: 2011, Performative architectural morphology: Finger-joined plate structures integrating robotic manufacturing, biological principles and location-specific requirements. In Gengnagel, C., Kilian, A., Palz, N. and Scheurer, F. (eds.), Computational Design Modeling, Proceedings of the Design Modeling Symposium Berlin, Springer-Verlag, Berlin/Heidelberg, pp. 259-266. (ISBN: 978-3642234347)
P033 Lienhard, J. Fleischmann and Menges, M.: 2011, Computational Design Synthesis: Embedding Material Behaviour in Generative Computational Processes, Proceedings of the 29th eCAADE Conference, Ljubljana (Slovenia) 21-24 September 2011, pp. 759-767. (ISBN 978-9491207013)
P032 Spaeth, B. and Menges, A.: 2011, Performative Design for Spatial Acoustics – Concept for an evolutionary design algorithm based on acoustics as design driver, Proceedings of the 29th eCAADE Conference, Ljubljana 21-24 September 2011, pp. 461-468. (ISBN 978-9491207013)
P031 Ahlquist, S. and Menges, A.: 2011, Methodological Approach for the Integration of Material Information and Performance in the Design Computation for Tension-Active Architectural Systems, Proceedings of the 29th eCAADE Conference, Ljubljana (Slovenia) 21-24 September 2011, pp. 799-807. (ISBN 978-9491207013)
P030 Krieg, O., Dierichs, K., Reichert, S., Schwinn, T. and Menges, A.: 2011, Performative architectural morphology: Robotically manufactured biomimetic finger-joined plate structures, Proceedings of the 29th eCAADE Conference, Ljubljana (Slovenia) 21-24 September 2011, pp. 573-580. (ISBN 978-9491207013)
P029 Irlwek, M. and Menges, A.: 2011, Variant Generation and Convergence in Computational Design Processes based on Horst Rittel´s Design Methodology, in: Connecting Brains Shaping the World – Collaborative Design Spaces, EuropIA 13 Conference 2011, Sapienza Universitá di Roma (Italy), 08–10 June 2011, pp. 139-158. (ISBN: 979-1-090094-05-5)
P028 Menges, A., Schleicher, S., Fleischmann, M.: 2011, Research Pavilion ICD/ITKE, in Glynn, R. and Sheil, B., Proceedings of the Fabricate: Making Digital Architecture Conference, University College London, UK, 15.-16.04.2011, Riverside Architectural Press, Waterloo, pp. 22-27. (ISBN 978-1926724096)
P027 Dierichs, K., Fleissner, F. and Menges, A.: 2011, Interrelation of experiment and simulation in the development of Aggregate Architectures, Digital Proceedings of the International Symposion on Algorithmic Design for Architecture and Urban Design (ALGODE) in Tokyo (Japan), 14-16 March 2011.
2010  
P026 Menges, A.: 2010, Integral Computational Design: Synthesizing Computation and Materialization in Architecture, AMIT International Journal for Architecture and Modern Information Technologies, Vol. 4 No. 03/2010. (ISSN: 1998-4839)
P025 Reichert, S. and Menges. A.: 2010, Responsive Surface Structures, Bionik: Patente aus der Natur, Proceedings of Fifth Bionics Conference, Bionik-Innovations-Centrum (B-I-C), Bremen (Germany) 22-23 October 2010, pp. 28-35. (ISBN 978-300033467-2)
P024 Menges, A.: 2010, Material Information: Integrating Material Characteristics and Behavior in Computational Design for Performative Wood Construction, In:Formation, Proceeding of the 30th Conference of the Association For Computer Aided Design In Architecture (ACADIA), New York City (USA) 28-24 October 2010, pp. 151-158. (ISBN 978-1450734714)
P023 Dierichs, K. and Menges, A.: 2010, Material Computation in Architectural Aggregate Systems, In:Formation, Proceeding of the 30th Conference of the Association For Computer Aided Design In Architecture (ACADIA), New York City (USA) 28-24 October 2010, pp. 372-78. (ISBN 978-1450734714)
P022 Ahlquist, S. and Menges, A.: 2010, Realizing Formal and Functional Complexity for Structurally Dynamic Systems in Rapid Computational Means, in: Ceccato, C., Hesselgren, L., Pauly, M., Pottmann, H., Wallner, J. (eds.), Proceedings of Advances in Architectural Geometry Conference 2010, Vienna, Springer, Berlin, pp. 205-220. (ISBN: 978-3709103081)
2009  
P021 Menges, A.: 2009, Performative Wood: Integral Computational Design for Timber Construction, reform: Building a Better Tomorrow, Proceeding of the 29th Conference of the Association For Computer Aided Design In Architecture (ACADIA), Chicago (USA) 21-25 October 2009, pp. 66-74. (ISBN 9780984270507)
P020 Menges, A.: 2009, Integral Computational Design for Composite Spacer Fabric Structures: Integral Processes of Form Generation and Fabrication for Sandwich Structured Composites with 3D Warp-Knitted Textile Core, Computation: The New Realm of Architectural Design, 27th eCAADe Conference Proceedings, Istanbul (Turkey) 16-19 September 2009, pp. 289-298. (ISBN 9780954118389)
P019 Fleischmann, M., Ahlquist, S., Menges, A.: 2009, Articulating Boundaries of Computational Meshes, Proceedings of Design Modeling Symposium Berlin 2009, pp. 197-203. (ISBN 9783894621773)
2008  
P018 Menges, A.: 2008, Manufacturing Performance, Architectural Design, Vol. 78 No. 2, pp. 42-47. (ISBN 978-0470516874)
P017 Hensel, M., Menges, A., Sunguroglu, D.: 2008, Material Performance, Architectural Design, Vol. 78 No. 2, pp. 34-41. (ISBN: 978-0470516874)
P016 Hensel, M., Menges, A.: 2008, Inclusive Performance: Efficiency versus Effectiveness, Architectural Design, Vol. 78 No. 2, pp. 54-63. (ISBN: 978-0470516874)
P015 Hensel, M., Menges, A.: 2008, Membrane Spaces, Architectural Design, Vol. 78 No. 2, pp. 74-79. (ISBN: 978-0470516874)
P014 Hensel, M., Menges, A.: 2008, Aggregates, Architectural Design, Vol. 78 No. 2, pp. 80-87. (ISBN: 978-0470516874)
P013 Hensel, M., Menges, A.: 2008, Designing Morpho-Ecologies – Versatility and Vicissitude of Heterogeneous Space, Architectural Design, Vol. 78 No. 2, pp. 102-113. (ISBN: 978-0470516874)
2007  
P012 Hemberg, M., O’Reilly, U.-M., Menges, A.: 2007, Architects’ Experience with an Emergent Design Tool, in Machado, P. and Romero, J.(eds.), The Art of Artificial Evolution, Springer, Berlin, pp. 167-189. DOI: 10.1007/978-3-540-72877-1_8 (ISBN: 978-3540728764)
P011 Menges, A.: 2007, Computational Morphogenesis, Proceedings of the Third International Conference of the Arab Society for Computer Aided Architectural Design 2007, Alexandria, pp. 725-744. (ISBN: 977-3283828)
2006  
P010 Hensel, M., Menges, A.: 2006, Material and Digital Design Synthesis: Integrating Material Self-Organisation, Digital Morphogenesis, Associative Parametric Modelling and Computer-Aided Manufacturing, Architectural Design, Vol. 76 No. 2, pp. 88-97. (ISBN 0470015292)
P009 Hensel, M., Menges, A.: 2006, Differentiation and Performance: Multi-performative Architectures and Modulated Environments, Architectural Design, Vol. 76 No. 2, pp. 60-69. (ISBN 0470015292)
P008 Menges, A.: 2006, Manufacturing Diversity, Architectural Design, Vol. 76 No. 2, pp. 70-77. (ISBN 0470015292)
P007 Menges, A.: 2006, Instrumental Geometry, Architectural Design, Vol. 76 No. 2, pp. 42-53. (ISBN 0470015292)
P006 Menges, A.: 2006, Polymorphism, Architectural Design, Vol. 76 No. 2, pp. 78-87. (ISBN 0470015292)
2004  
P005 Hensel, M., Menges, A., Weinstock, M.: 2004, Fit Fabrics, Architectural Design, Vol. 74 No. 3, pp. 40-47. (ISBN: 0470866888)
P004 Hensel, M., Menges, A., Weinstock, M.: 2004, Manufacturing Complexity, Architectural Design, Vol. 74 No. 3, pp. 72-79. (ISBN: 0470866888)
P003 Menges, A.: 2004, Morpho-Ecologies: Approaching Complex Environments, Architectural Design, Vol. 74 No. 3, pp. 80-89. (ISBN: 0470866888)
P002 Hemberg, M., Menges, A., O’Reilly, U.-M.: 2004, Evolutionary Computation in Architecture, Architectural Design, Vol. 74 No. 3, pp. 48-53. (ISBN: 0470866888)
P001 Hensel, M., Menges, A., Weinstock, M.: 2004, Emergence in Architecture, Architectural Design, Vol. 74 No. 3, pp. 6-10. (ISBN: 0470866888)

 

ARTICLES / BOOK CHAPTERS

 

2018  
A125 Dörstelmann, M., Prado, M., Menges, A.: 2018, Explorative Design and Fabrication Strategies for Fibrous Morphologies in Architecture, in Yuan, P., Menges, A., Leach, N. (eds.), Digital Fabrication, Tongji University Press, Shanghai, PP. 171-184. (ISBN: 978-7560873343)
A124 Schwinn, T., Krieg, O., Menges, A.: 2018, Landesgartenschau Exhibition Hall: Robotically Fabricated Lightweight Timber Shell, in Yuan, P., Menges, A., Leach, N. (eds.), Digital Fabrication, Tongji University Press, Shanghai, PP. 123-130. (ISBN: 978-7560873343)
A123 Menges, A.: 2018, Future Wood: Material Integration in Computational Design, in Yuan, P., Menges, A., Leach, N. (eds.), Digital Fabrication, Tongji University Press, Shanghai, PP. 115-122. (ISBN: 978-7560873343)
A122 Menges, A.: 2018, Coalescences of Machine and Material Computation: Rethinking Computational Design and Robotic Fabrication through a Morphogenetic Approach, in Yuan, P., Menges, A., Leach, N. (eds.), Digital Fabrication, Tongji University Press, Shanghai, PP. 31-40. (ISBN: 978-7560873343)
A121 Menges, A.: 2018, Elytra Filament Pavilion, in Building Giants Jan 2018, Indore, pp. 43-51.
A120 Menges, A., Knippers, J.: 2018, Fibrous Tectonics, in Daas, M., Wit, A. (Eds.), Towards a Robotic Architecture, ORO Editions, Novato, pp. 64-75. (ISBN: 978-1939621634)
2017  
A119 Menges, A.: 2017, Synthesis of Computation and Materialization: Three Explorations in Architectural Design, in Design Society (Eds.), Minding the Digital, Tongji University Press, Shanghai, pp. 54-65. (ISBN: 978-7-5608-7485-2)
A118 Menges, A., Knippers, J.: 2017, Architektonisches Potential tragender Faserverbundstrukturen, in DBZ Deutsche BauZeitschrift 12/2017, Gütersloh, pp. 61-66. (ISSN: 0011-4782)
A117 Knippers, J., Menges, A.: 2017, Computerbasierte Prozesse für bionische Tragkonstruktionen, in Lang, W., Hellstern, C. (Eds.), Visionäre und Alltagshelden: Ingenieure – Bauen – Zukunft, DETAIL, München, pp. 51-57. (ISBN: 978-3-95553-375-5)
A116 Menges, A.: 2017, Computational Material Cultures, in De Rycke, K., Gengnagel, C., Baverel, O., Burry, J., Mueller, C., Nguyen, M.M., Rahm, P., Thomsen, M.R. (Eds.), Humanizing Digital Reality – Design Modelling Symposium Paris 2017, Springer, Singapore, pp. 5-11. (DOI: 10.1007/978-981-10-6611-5)
A115 Maxim, A., Lerke, O., Prado, M., Dörstelmann, M., Menges, A., Schwieger, V.: 2017, UAV Guidance with Robotic Total Station for Architectural Fabrication Processes, in Hassan, A. (ed.), Unmanned Aerial Vehicles 2017, Wißner-Verlag, Augsburg, pp. 145-161. (ISBN 978-3-95786-107-8)
A114 Menges, A.: 2017, Material Computation: Toward Self-X Material Systems in Architecture, in Tibbits, S. (ed.), Active Matter, The MIT Press, Cambridge, pp. 261-270. (ISBN 978-0262036801)
A113 Bass, C., Sheil, B., Menges, A.: 2017, Carl Bass, Bob Sheil and Achim Menges in Conversation, in Menges, A., Sheil, B., Glynn, R., Skavara, M. (eds), 2017, Fabricate – Rethinking Design and Construction, UCL Press, London, pp. 166-173. (ISBN 978 1 78735 000 7)
2016  
A112 Rinderspacher, K., De Micoli, S., Menges, A.: 2016, Informing Stone Morphologies: Integration of Erosion-Based Formation Processes through Event-Driven Fabrication, in: The Site Magazine (36) 2016, Edmonton, pp.  114–119. (ISSN 2369-9566)
A111 Krieg, O.: 2016, Engineering Perspectives: Oliver David Krieg in Conversation with Manfred Grohmann and Jan Knippers, in Menges, A., Schwinn, T., Krieg, O. (eds.), Advancing Wood Architecture – A Computational Approach, Routledge, Oxford, pp. 199-210. (ISBN: 9781138932982))
A110 Schwinn, T.: 2016, Manufacturing Perspectives: Tobias Schwinn in Conversation with Hholzbau Amann and Müllerblaustein, in Menges, A., Schwinn, T., Krieg, O. (eds.), Advancing Wood Architecture – A Computational Approach, Routledge, Oxford, pp. 185-198. (ISBN: 9781138932982)
A109 Krieg, O.: 2016, HygroSkin – Meteorosensitive Pavilion, in Menges, A., Schwinn, T., Krieg, O. (eds.), Advancing Wood Architecture – A Computational Approach, Routledge, Oxford, pp. 125-140. (ISBN: 9781138932982)
A108 Schwinn, T.: 2016, Landesgartenschau Exhibition Hall, in Menges, A., Schwinn, T., Krieg, O. (eds.), Advancing Wood Architecture – A Computational Approach, Routledge, Oxford, pp. 111-124. (ISBN: 9781138932982)
A107 Menges, A.: 2016, Integrative Design Computation for Advancing Wood Architecture, in Menges, A., Schwinn, T., Krieg, O. (eds.), Advancing Wood Architecture – A Computational Approach, Routledge, Oxford, pp. 97-110. (ISBN: 9781138932982)
 A106  Menges, A., Schwinn, T., and Krieg, O.: 2016, Advancing Wood Architecture – an Introduction, in Menges, A., Schwinn, T., Krieg, O. (eds.), Advancing Wood Architecture – A Computational Approach, Routledge, Oxford, pp. 1-12. (ISBN: 9781138932982)
A105 Knippers, J. and Menges, A.: 2016, Fasern neu gedacht – auf dem Weg zu einer Konstruktionssprache, in C. Schittich (Ed.): Material + Oberfläche. Materials + Finishes. New edition. München: Institut f. intern. Architektur-Dok (best of DETAIL), pp. 19–24. (ISBN 978-3-95553-322-9)
2015  
A104 Knippers, J. and Menges, A.: 2015, Fasern neu gedacht – auf dem Weg zu einer Konstruktionssprache, in Detail, , pp. 1238-1242
A103 Ahlquist, S. and Menges, A.: 2015, Materiality and Computational Design: Emerging Material Systems and the Role of Design Computation and Digital Fabrication. In Kanaani, M. and Kopec, D. A. (eds): The Routledge companion for architecture design and practice: Established and emerging trends, Routledge, Taylor & Francis Group, New York, pp. 149–68.  (ISBN 978-1-138-02315-4)
A102 Menges, A.: 2015, Computational Design, Urbanism and Architecture: Digital 2.0, 10.2015, No.189, p. 9. (ISSN 1673.0232) 
A101 Menges, A., Schwinn, T., & Krieg, O.: 2015, Landesgartenschau Exhibition Hall. In S. Pfeiffer (Ed.), Interlocking Digital and Material Cultures, Spurbuchverlag, Baunach, pp. 56-71. (ISBN 978-3-88778-435-5)
A100 Krieg, O., Schwinn, T., & Menges, A.: 2015, Integrative Design Computation for Local Resource Effectiveness in Architecture. In F. Wang & M. Prominski (Eds.), Urbanization and Locality: Strengthening Identity and Sustainability by Site-Specific Planning and Design, Springer Science and Business Media, pp. 123–143. (ISBN 978-3-662-48492-0; DOI: 10.1007/978-3-662-48494-4)
A099 Menges, Achim: 2015, Fusing the Computational and the Physical – Towards a Novel Material Culture, Architectural Design, Vol. 85 No. 5, Wiley, London, pp. 08-15. (ISBN 978-11118878378)
A098 Schwinn, T., Krieg, O., Menges, A.: 2015, Landesgartenschau Exhibition Hall Robotically Fabricated Lightweight Timber Shell. In Yuan, P., Menges, A., Leach, N. (eds): Robotic Futures, Tongji University Press, Shanghai, pp. 118-123. (ISBN 978-7-5608-5845-6)
A097 Doerstelmann, M., Prado, M., Menges, A.: 2015, Explorative Design and Fabrication Strategies for Fibrous Morphologies in Architecture. In Yuan, P., Menges, A., Leach, N. (eds): Robotic Futures, Tongji University Press, Shanghai, pp. 54-65. (ISBN 978-7-5608-5845-6)
A096 Menges, A.: 2015, Coalescences of Machine and Material Computation – Rethinking Computational Design and Robotic Fabrication through a Morphogenetic Approach. In Yuan, P., Menges, A., Leach, N. (eds): Robotic Futures, Tongji University Press, Shanghai, pp. 17-22. (ISBN 978-7-5608-5845-6)
A095 Menges, A.: 2015, Form und Findung, in Bauwelt, No. 20.2015,  Bauverlag BV GmbH, pp.30-33. (ISSN 0005-6855)
A094 Menges, A., Knippers, J.: 2015, Robotic Fabrication. ICD/ITKE Research Pavilion 2012, in Andia, A. and Spiegelhalter, L. (eds.), Postparametric automation in design and construction. Boston: Artech House, pp. 181–187. (ISBN 978-1-60807-693-2)
2014  
A093 Menges, A.: 2014, Achim Menges In Conversation with Philip Beesley, in Gramazio, F., Kohler, M., Langenberg, S. (eds.), Fabricate: Negotiating Design and Making, Zürich, pp. 156-165. (ISBN 978-3-85676-331-2)
A092 Menges, A.: 2014, Ktisma Interviews: Achim Menges, in Ktismajournal: Inevitability, Issue #4, University of Oregon’s School of Architecture and Allied Arts, pp. 77-84. (ISSN 2374-2216)
A091 Menges, A.: 2014, Innovation – Interview with Achim Menges by Veronika Valk, in Valk, V. (Ed.). Snow mud: protocols: the Estonian Academy of Arts Faculty of Architecture guest speaker series 2012-2013, pp. 64-70. (ISBN: 9789949467471)
A090 Menges, A.: 2014, ICD/ITKE Forschungspabillon – Robotisch gefertigte Wickelkonstruktion, in Arch+, No. 218, Arch+ Verlag GmbH, Aachen, p. 5 (ISSN 0587-3452)
A089 Menges, A.: 2014, Forstpavillon – Robotisch gefertigte Holzschalenkonstruktion, in Arch+, No. 218, Arch+ Verlag GmbH, Aachen, p. 4 (ISSN 0587-3452)
A088 Menges, A., Reichert, S., Krieg, O.: 2014, Meteorosensitive Architectures, in MKretzer, M. and Hovestadt, L. (eds.), ALIVE: Advances in Adaptive Architecture, Birkhäuser Verlag, pp. 39-42. (ISBN 978-3-99043-667-7)
A087 Krieg, O.: 2014, Neue Dimensionen: Computerbasierter Holzbau vom Entwurf bis zur Fertigung, in Holz_Haus Tage 2014: Fachtagung für Innovative Holzhausbauer, Holzforschung Austria, Wien, pp. 64-69. (ISBN 678-3-9503707-4-4)
2013  
A086 Menges, A.: 2013, Form und Findung: Frei Ottos Wegweisungen, in Moro J.L. (Ed.), Frei Otto zum 85sten, Festschrift zum Symposium anlässlich seines 85. Geburtstags, IEK, Universität Stuttgart, pp. 30-38.
A085 Knippers, J., Menges, A.: 2013, LEICHT Forschungspavillon in Stuttgart, in Kuballa, S. (ed.), Baukultur – Zeitschrift des DAI, No. 04/2013, pp. 30-31. (ISSN 1862-9571)
A084 Menges, A., Krieg, O., Reichert, S.: 2013, HygroSkin – ein meteorosensitiver Pavillon, Klimasensible Holzhaut für die Architektur, in Link, H. (ed.), Green Building, Vol. 11/2013, Schiele & Schön GmbH, Berlin, pp. 10-11. (ISSN 1866-8151)
A083 Menges, A.: 2013, Performative Morphology in Architecture: Integrative Design research by the Institute of Computational Design, Serbian Architectural Journal, Vol. 5 (2013), No.2, pp.92-105. (ISSN 1821-3952)
A082 Menges, A., Krieg, O., Reichert, S.: 2013, HygroSkin – Meteorosensitiver Pavillon, Architektur Fachmagazin, No. 07/2013, pp. 67-69. (ISSN 1606-4550)
A081 Menges, A.: 2013, Material Systems, Computational Morphogenesis and Performative Capacity, in Oxman, R. and Oxman, R. (ed.), Theories of the Digital in Architecture, Routledge, Abingdon/NewYork, pp.195-208. (ISBN 978-0-415-46923-4)
A080 Menges, A.: 2013, Coalescences of Machine and Material Computation, in Lorenzo-Eiroa, P. and Sprecher, A. (ed.), Architecture in Formation, Routledge, Abingdon/NewYork, pp. 275-285. (ISBN 978-0-415-53489-5)
A079 Menges, A.: 2013, Future Integration – From Post-Rationalization to Pre-Information in Design Computation, Proceedings of the Future Traditions Conference 2012, FAUP Pubilcacoes, Porto, pp. 16-21. (ISBN 978-989-8527-03-5)
A078 Knippers, J., Menges, A.: 2013, ICD/ITKE Research Pavilion 2011, in Hu, C. (eds.), Architectural Material & Texture I, pp. 266-273. (ISBN 978-7-214-08683-9)
2012  
A077 Schwinn, T.: 2012, Programmable Logic, in Yuan, P.F., Leach, N., (Eds.), Scripting the Future, Tongji University Press, Shanghai, pp. 56-61. (ISBN 978-7-5608-4835-8)
A076 Menges, A.: 2012, Future Wood: Material Integration in Computational Design, in Yuan, P.F., Leach, N., (eds.), Fabricating the Future, Tongji University Press, Shanghai, pp. 42-49. (ISBN 978-7-5608-4836-5)
A075 Menges, A.: 2012, Material Behavior, in Spina, M., Gow, M. (eds.), Material Beyond Materials: Composite Tectonics, Sci-Arc Publications, Los Angeles, pp. 58-65. (ISBN 978-0-9760079-6-8)
A074 Knippers, J., Menges, A.: 2012, Skeleton Morphology of Sand Dollar – ICD/ITKE Research Pavilion, Beyond: Architecture Art Culture, No. 13, pp. 24-29. (ISSN 2076-5673)
A073 Menges, A.: 2012, Material Generation: Materiality and Materialisation as Active Drivers in Design Computation, in Voyatzaki, M., Spiridonidis, C. (ed.), Proceedings of the Conference of Integrated Planning Processes 2012, MSA Muenster, pp. 37-44. (ISBN 978-2-930301-58-7)
A072 Menges, A.: 2012, Materially Informed Computational Design in Ecological Architecture, in Schröpfer, T. (ed.), Ecological Urban Architecture, Birkhäuser, Basel, pp. 60-69. (ISBN 978-30346-08008)
A071 Menges, A.: 2012, Integral Formation and Materialisation: Computational Form and Material Gestalt, Time+Architecture, No. 05/2012, pp. 42-45. (ISSN: 1005-684X)
A070 Menges, A.: 2012, Polymorphism. In Carpo, M. (ed.), The Digital Turn in Architecture 1992-2012, John Wiley and Sons, London, pp. 165-181. (ISBN 978-1-119-95174-2)
A069 Hensel, M., Menges, A., Weinstock, M.: 2012, Introduction to Emergence: Morphogenetic Design Strategies. In Carpo, M. (ed.), The Digital Turn in Architecture 1992-2012, John Wiley and Sons, London, pp. 160-164. (ISBN 978-1-119-95174-2)
A068 Menges, A.: 2012, Material Generation: Materiality and Materialisation as Active Drivers in Design Computation, in Cabrinha, M., Johnson, J., Steinfeld, K. (eds.), Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA), San Francisco, pp. 21-24. (ISBN 978-1-62407267-3)
A067 Menges, A.: 2012, HygroScope – Meteorosensitive Morphology, in Gattegno, N., Price, B. (eds.), Project Catalogue of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA), San Francisco, pp. 21-24. (ISBN 978-1-62407-268-0)
A066 Menges A.,: 2012, HygroScope – Meteorosensitive Morphology, Arch Plus, No. 206-207, p. 7. (ISSN: 0587-3452)
A065 Menges A., Reichert, S.: 2012, HygroScope – Meteorosensitive Morphology, Journal Architekten Planer, No. 07/2012, p. 176-177. (ISSN: 1866-8917)
A064 Menges A., Knippers J.: 2012, Von den Seeigeln lernen, Bauen mit Holz, No.6/2012, pp. 24-27. (ISSN: 0005-6545)
A063 Menges, A.: 2012, Material Computation: Higher Integration in Morphogenetic Design, Architectural Design, Vol. 82 No. 2, Wiley Academy, London. pp. 14-21. (ISBN: 978 0470973301)
2011  
A062 Menges, A.: 2011, Polymorphism, Time+Architecture, No. 06/2011, pp. 118-123. (ISSN: 1005-684X)
A061 Menges, A.: 2011, Manufacturing Diversity, Time+Architecture, No. 06/2011, pp. 113-117. (ISSN: 1005-684X)
A060 Ahlquist, S. and Menges, A.: 2011, Computational Design Thinking. In Menges, A., Ahlquist, S. (eds.), Computational Design Thinking, John Wiley and Sons, London, pp. 10-29. (ISBN 978-0470665701)
A059 Menges, A.: 2011, Integral Formation and Materialisation: Computational Form and Material Gestalt. In Menges, A., Ahlquist, S. (eds.), Computational Design Thinking, John Wiley and Sons, London. (ISBN 978-0470665701)
A058 Menges, A. : 2011, Megabytes de madera: Dei CAD al nuevo Diseno Computacional, Arquitectura Viva, No. 137, pp. 24-27. (ISSN: 0214-1256)
A057 Knippers, J., Menges, A.: 2011, Pabellon ICD/ITKE, Arquitectura Viva, No. 137, pp. 24-27. (ISSN: 0214-1256)
A056 Knippers, J., Menges, A.: 2011, ICD/ITKE Research Pavilion 2010, in Jodido, P., Temporary Architecture Now, Taschen, Cologne, pp. 206-211. (ISBN: 978-3836523288)
A055 Knipper, J., Menges, A.: 2011, ICD/ITKE Research Pavilion 2010, A+U: Timber Innovation, 07/2011 No.490, pp. 10-15.
A054 Gabler, M., Knippers, J., La Magna, R., Menges, A., Reichert, S., Schwinn, T., Waimer, F.: 2011, Leichtbau – Prinzip Seeigel, Bauwelt Vol. 102, No. 31/2011, pp. 20-21. (ISSN: 0005-6855)
A053 Knippers, J., Menges, A. : 2011, Research Pavilion ICD/ITKE, C3 Architecture-Landscape-Urbanism, Vol. 27 No. 317 01/2011, pp. 120-127. (ISSN: 2092-5190)
2010  
A052 Menges, A.: 2010, Architektonische Form- und Materialwerdung am Übergang von Computer Aided Design zu Computational Design, Detail, Vol. 50 No. 05/2010, pp. 420-425. (ISSN: 0011-9571)
A051 Menges, A. : 2010, Membrandach der Architectural Association in London, Detail, Vol. 50 No. 05/2010, pp. 454-457. (ISSN: 0011-9571)
A050 Dierichs, K. and Menges, A.: 2010, Natural Aggregation Processes as Models for Architectural Material Systems, in: Proceedings of the Design and Nature Conference 2010, Pisa, Italy, Southampton, WIT Press, pp. 17-27. (ISBN: 978-1845644543)
A049 Menges, A.: 2010, Form Generation and Materialization at the Transition from Computer-aided to Computational Design, Detail (English Edition), Vol. 2010 No. 04, pp. 330-335. (ISSN: 1614-4600)
A048 Menges, A.: 2010, AA Membrane Canopy in London, Detail (English Edition), Vol. 2010 No. 04, pp. 350-353. (ISSN: 1614-4600)
A047 Menges, A.: 2010, A Novel Synthesis of Computational Form Generation and Materialisation, Journal of Materials in Architecture – Mimarlikta Malzeme, Vol. 5 No.15/2010, pp.33-40. (ISSN 1306-6501)
A046 Menges, A.: 2010, Instrumental Geometry, in Corser, R.(ed.), Fabricating Architecture: Selected Readings in Digital Design and Manufacturing, Princeton Architectural Press, New York, pp. 22-41. (ISBN 978-1568988894)
A045 Menges, A.: 2010, Material Systems, Computational Morphogenesis and Performative Capacity, in Hensel, M., Menges, A., Weinstock, M., Emergent Technologies and Design, Routledge, Oxford, pp. 43-61 (ISBN 978-0415493437)
A044 Menges, A.: 2010, Performative Wood: Integral Computational Design for a Climate-Responsive Timber Surface Structure, in Mostafavi, M., Doherty, G. (eds.), Ecological Urbanism, Lars Müller Publishers, Baden, pp. 522-527. (ISBN 978-3037781890)
A043 Menges, A.: 2010, Uncomplicated Complexity: Integration of Material, Form, Structure and Performance in Computational Design, GAM Nonstandard Structures, No. 6, pp. 140-151. (ISBN: 9783211992098)
A042 Kraft, S., Menges, A.: 2010, Simple Systems – Complex Capacities, ArchPlus, No. 196, pp. 6-9. (ISSN 0587-3452)
2009  
A041 Hensel, M., Menges, A.: 2009, Holz Form Findung, ArchPlus, No. 193, pp. 106-109. (ISSN: 05873452)
A040 Menges, A.: 2009, Wechselwirkungen / Interazoni / Interactions, Zona #4 in Abitare, No. 494, 08/2009, pp. 7-12.
A039 Menges, A.: 2009, Postagriculture, in Liu, Y.-T., M., Lim, C.-K. (eds.), New Tectonics – Towards a New Theory of Digital Architecture, Birkhäuser, Basel, pp. 38-39. (ISBN 978-3764386917)
A038 Hensel, M., Menges, A.: 2009, Patterns in Performance-oriented Design, Architectural Design, Vol. 79 No. 6, pp. 88-93. (ISBN: 978-0470699591)
A037 Hensel, M., Menges, A.: 2009, The Heterogeneous Space of Morpho-Ecologies, in Hensel, M., Hight, C., Menges, A. (eds.), Space Reader: Heterogeneous Space in Architecture, John Wiley and Sons, London, pp. 182-201. (ISBN 978-0470519424)
A036 Hensel, M., Hight, C., Menges, A.: 2009, En route to a Discourse on Heterogeneous Space beyond Modernist Space-Time and Post-modernist Social Geography, in Hensel, M., Hight, C., Menges, A. (eds.), Space Reader: Heterogeneous Space in Architecture, John Wiley and Sons, London, pp. 8-36. (ISBN 978-0470519424)
2008  
A035 Menges, A.: 2008, Responsive Surface Structure, Pasajes Arquitectura, No. 100, pp. 89-91. (ISSN 15751937)
A034 Hensel, M., Menges, A.: 2008, Form- und Materialwerdung: Das Konzept der Materialsystem, ArchPlus, No. 188, pp. 18-25. (ISSN 05873452)
A033 Hensel, M., Menges, A.: 2008, Gebaute Umwelt und Heterogener (Lebens)Raum: Das Konzept der Morpho-Ökologie, ArchPlus, No. 188, pp. 26-30. (ISSN 05873452)
A032 Hensel, M., Menges, A.: 2008, Performance als Forschungs- und Entwurfskonzept, ArchPlus, No. 188, pp. 31-37. (ISSN 05873452)
A031 Hensel, M., Menges, A.: 2008, Von der universellen zur performativen Komponente, ArchPlus, No. 188, pp. 38-45. (ISSN 05873452)
A030 Hensel, M., Menges, A.: 2008, Materialsysteme: Verformungen, ArchPlus, No. 188, pp. 46-55. (ISSN 05873452)
A029 Hensel, M., Menges, A.: 2008, Materialsysteme: Gradientensysteme, ArchPlus, No. 188, pp. 56-65. (ISSN 05873452)
A028 Hensel, M., Menges, A.: 2008, Materialsysteme: Membranen, ArchPlus, No. 188, pp. 66-75. (ISSN 05873452)
A027 Hensel, M., Menges, A.: 2008, Materialsysteme: Aggregate, ArchPlus, No. 188, pp. 76-85. (ISSN 05873452)
A026 Hensel, M., Menges, A.: 2008, Grenzüberschreitungen Architektur – Biologie, ArchPlus, No. 188, pp. 99-101. (ISSN 05873452)
A025 Menges, A.: 2008, Rapid Manufacturing 1:1, ArchPlus, No. 188, pp. 102-105. (ISSN 05873452)
A024 Menges, A.: 2008, Integral Design – Computational Form and Material Gestalt in Menges, A. (ed.): 2008, Systemisches Denken und Integrales Entwerfen – System Thinking and Integral Design, Hochschulverlag HFG Offenbach, Offenbach. (ISBN: 978-3921997697)
A023 Hensel, M., Menges, A.: 2008, Performance in Morpho-Ecological Design, Architectural Design, Vol. 78 No. 2, pp. 06-13. (ISBN: 978-0470516874)
A022 Menges, A.: 2008, Integral Formation and Materialisation: Computational Form and Material Gestalt, in B. Kolarevic and K. Klinger (ed.), Manufacturing Material Effects: Rethinking Design and Making in Architecture, Routledge, New York, pp. 195–210. (ISBN 978-0-415-77574-8)
A021 Hensel, M., Kamvari, O., Menges, A.: 2008, Performance-Oriented Design, Iranian Architecture Quarterly, Vol. 8 No. 31 & 32, pp. 13-25.
A020 Hensel, M., Menges, A.: 2008, Differentiated and Multi-Performance Material Systems, Iranian Architecture Quarterly, Vol. 8 No. 31 & 32, pp. 81-87.
A019 Menges, A.: 2008, Lounge Landscape, AIT Magazine, No. 4/2008, pp. 40-41. (ISBN: 19456171090)
2007  
A018 Menges, A.: 2007, Higher Level Integration in Architectural Design, ERA 21 Architectural Journal, 2007 No. 5, pp. 44-48. (ISSN 1801089X)
A017 Menges, A.: 2007, New Synergies: Integral Processes of Computational Morphogenesis, Architektura Murator, Vol. 151 No.4, pp. 96-101. (ISSN 1232-6372)
A016 Menges, A.: 2007, Responsive Surface Structures, in Beesley, P., Neumann, O. (eds.), Future Wood: Innovation in Building Design and Construction, Riverside Architectural Press, Vancouver, pp. 74-79. (ISBN: 978-0-9780978-2-0)
A015 Hensel, M., Menges, A.: 2007, Nested Capacities, Gradient Thresholds and Modulated Environments: Towards Differentiated Multi-Performative Architectures, in Lally, S., Young, J., Softspace, Routledge, Oxford, pp. 52-67. (ISBN: 978-0-415-40202-6)
2006  
A014 Hensel, M., Menges, A.: 2006, Morpho-Ecologies – Towards a Discourse of Heterogeneous Space in Architecture, in Hensel, M., Menges, A., Morpho-Ecologies, AA Publications, London, pp. 16-61 (ISBN 190290253X)
A013 Felipe, S., Menges, A., Truco, J.: 2005, Integral Envelopes, in Estevez, A. T. (ed.) Genetic Architectures: Digital Tools and Organic Forms, Sites Books, Barcelona, pp. 108-117 (ISBN: 093082959X)
2005  
A012 Menges, A.: 2005, Pluripotent Components – An Alternative Approach to Parametric Design, AA Files, No. 52, pp. 63-74. (ISBN: 1902902440)
2004  
A011 Menges, A.: 2004, Postagriculture, in Stacey, M. (ed.), Digital Fabricators, University of Waterloo Press, Waterloo, pp. 58-62. (ISBN 1897001037)
A010 Menges, A.: 2004, Postagriculture, The Architects Journal, No. 9/2004, pp. 46-50. (ISSN 00038466)
A009 Menges, A.: 2004, The Postagriculture Project, World Architecture Review, No. 94/95, pp. 110-115. (ISSN 10008373)
A008 Hensel, M., Menges, A., Weinstock, M.: 2004, Frei Otto in Conversation with the Emergence + Design Group, Architectural Design, Vol. 74 No. 3, pp. 18-25. (ISBN: 0470866888)
A007 Hensel, M., Menges, A., Weinstock, M.: 2004, Foreign Office Architects in Conversation with the Emergence + Design Group, Architectural Design, Vol. 74 No. 3, pp. 34-39. (ISBN: 0470866888)
A006 Hensel, M., Menges, A., Weinstock, M.: 2004, Engineering Design: Working with Advanced Geometries, Architectural Design, Vol. 74 No. 3, pp. 64-71. (ISBN: 0470866888)
A005 Menges, A.: 2004, The Landscape Playhouse Project, in Liu, Y.-T., Diversifying Digital Architecture, Birkhäuser, Basel, 89-93. (ISBN 3764371609)
A004 Menges, A.: 2003, The Postagriculture Project, AB Arhitektov Bulletin, No. 161-162, pp. 58-59. (ISSN 0352982)
A003 Menges, A.: 2003, The Postagriculture Project, in Liu, Y.-T., Developing Digital Architecture, Birkhäuser, Basel, pp.106-111 (ISBN 3764321652)
A002 Menges, A.: 2003, The Postagriculture Project, AA Files, No. 49, London, pp. 87-93 (ISBN 1902902343)
A001 Menges, A.: 2003, The Postagriculture Project, in Papadakis, A. (ed.), Innovation: From Experimentation to Realisation, Papadakis Publisher, London, pp. 64-69 (ISBN 190109250X)

 

PUBLICATION OF WORK

 

2018  
W282 Kennedy, S.: 2018, What Would Wood?, in Into the Woods, No. 45 S/S 2018, Harvard Design Magazine, Cambridge, P. 145.
W281 Bico, J., Reyssat, E., Roman, B.: 2018, Du merveilleux caché dans le quotidien, Flammarion, Paris, P. 235. (ISBN: 978-2081350618)
W280 Lang, W.: 2018, The Role of Civil and Structural Engineers in Society, in Structure, 02/2018, DETAIL, Munich, P. 17.
W279 Leitner, U.: 2018, Pavillonbauten für die Bundesgartenschau in Heilbronn, in Stahlbau heute, 1/2018, Verlagsgruppe Wiederspahn, Wiesbaden, P. 46.
W278 Germany Trade & Invest: 2018, Welcome to the Cluster Republic, in Markets Germany, 2/18, Berlin, P. 4.
W277 Bengisu, M., Ferrara, M.: 2018, Materials that Move – Smart Materials, Intelligent Design, Springer, Cham, pp. 103-139. (ISBN: 978-3-319-76889-2)
W276 Allianz Faserbasierte Werkstoffe Baden-Württemberg: 2018, Elytra Filament Pavilion, in IndexBuch: Textiles Bauen, Warlich Druck, Meckenheim, pp. 38-39. (ISBN: 978-3-87427-116-1)
W275 Miketta, G.: 2018, Ab nach Draussen, in Das Haus, 4/2018, P. 4.
W274 Hauk, P.: 2018, Land lobt Holzbaupreis 2018 aus, in BDB Ingenieurblatt: vereinigt mit Baumeisterzeitung, Ausgabe 1/2018, Geiselsberger, Karlsruhe, P. 10.
W273 German Design Council: 2018, Elytra Filament Pavilion – Fibrous Lightweight Construction, in Excellent Communications Design Volume I, German Design Award, Frankfurt am Main, pp. 108-109. (ISBN: 978-3-946318-27-9)
W272 Rnz: 2018, Buga 2019 setzt auf Hightech, in Rhein-Neckar-Zeitung, 26 Januar 2018, P. 7.
W271 Kistner, B.: 2018, Seeigel und Käferflügel Vorbild für Konstrukteure, in Heilbronner Stimme, 26 Januar 2018, P. 27.
2017  
W270 Chan, C.: 2017, Minding the Digital, Tongji University Press, Shanghai, pp. 12-17. (ISBN: 978-7-5608-7485-2)
W269 Bechthold, M., Weaver, J.: 2017, Materials science and architecture, in Nature Reviews Materials 2, Nature Publishing Group, London. (DOI: 10.1038/natrevmats.2017.82)
W268 Carpo, M.: 2017, The Second Digital Turn: Design Beyond Intelligence, MIT Press, Cambridge, pp. 44-56, 66. (ISBN 978-0262534024)
W267 Kohoutová, M.: 2017, Adaptabilní stíneni – biomimetické materiály, in Energeticky sobestacné budovy 4/2017, Praha, pp. 12-13.
W266 Weinersmith, K., Weinersmith, Z.: 2017, The Future of Programmable Materials, in Wall Street Journal, 4 November 2017, P. C4.
W265 Lang, W., Hellstern, C. (Eds.): 2017, Räume schaffen: Verbindung von Ästhetik und Struktur, in Visionäre und Alltagshelden: Ingenieure – Bauen – Zukunft, DETAIL, München, pp. 43. (ISBN: 978-3-95553-375-5)
W264 Philipp, K.: 2017, Das Buch der Architektur, Philipp Reclam Verlag, Ditzingen. (ISBN 978-3-15-011118-5)
W263 Zintz, K.: 2017, Wenn die Natur die Architektur beflügelt, in Stuttgarter Zeitung, 19. Oktober 2017, P. 1.
W262 Thoms-Hoffmann, I: 2017, Adenauerplatz Heidelberg. Roboter verändern auch die Architektur, in Rhein-Neckar-Zeitung, 7. Juli 2017
W261 Carbon Composites e.V., Carbon Composites Magazin, No. 02 | 2017.(ISSN: 2366-8024)
W260 Willführ, C.: 2017, Crazy Wege zu einer neuen Baukultur, in Metalligent No. 04 May-2017, pp. 38-45.(ISSN: 2367-2099)
W259 Völpel, D.: 2017, Leicht-Sinnig: Der Elytra Filament Pavilion basiert auf der Leichtbauweise von Käferflügeln, in Forschung Leben No. 08 May-2017, Universität Stuttgart, pp. 20-21.(ISSN: 2198-2848)
W258 Baus, U.: 2017, Remstaler Folies: 16 Stationen für die Landesgartenschau Remstal 2019, in Bauwelt Vol. 108, No. 12.2017, Bauverlag BV GmbH, pp. 52-53.(ISSN: 0005-6855)
W257 Hesedenz, K.: 2017, Morgen-Stars, in Vogue Living, 06.06.2017, pp. 8-9.
W256 Hoena, M.: 2017, Neu Formen des Bauens, in Suedwest Presse Magazin, 11.03.2017, p. 35.
W255 Hall, W. (ed.): 2017, WOOD, Phaidon Press, London and New York, pp. 25 & 146. (ISBN 978-0-7148-7348-0)
W254 Koch, K.: 2017, Flexible Festigkeit, in Holzbau Magazin, März 2017, DRW Verlag Weinbrenner, Leinfelden-Echterdingen, pp. 70-73. (ISSN 0018-3792)
W253 Preibisch, M.: 2017, Leichtbau: Pavillon-Prototypen aus Stuttgart, in werkspuren, (1) 2017, SWV Design und Technik, Zürich, pp. 14-15. (ISSN 1420-0198)
W252 Kries, M. and Klein, A.: 2017, Tritt der Roboter an die Spitze der Evolution?, in Hello Robot – Design zwischen Mensch und Maschine, Vitra Design Museum, Weil am Rhein, pp. 286-297. (ISBN 978-3-945852-10-1)
W251 Klein, A.: 2017, Auf der Suche nach Fragen, in Hello Robot – Design zwischen Mensch und Maschine, Vitra Design Museum, Weil am Rhein, pp. 10-17. (ISBN 978-3-945852-10-1)
W250 Paoletti, I.: 2017, ICD/ITKE Research Pavilions, in Arketipo, No. 108, 2017, pp.28-43.
W249 Heim, C.: 2017, Gewickelte Dächer. Von Robotern erstellte Architektur bei Vitra, in Basler Zeitung, 3. Februar 2017, p. 13.
W248 Lowenstein, O.: 2017, The rise of the robots, in Blueprint Magazine, No. 347, pp. 84-94.
W247 Koppelstätter, H.:2017, von der Natur lernen, in Living & Life, No. 1 2017, Magazin der Immobilien Regional AG . produktion: Koppelstätter Media GmbH, pp. 64-70.
W246 Greiser, S.: 2017, Robotisch gefertigte Holzschalenkonstruktion, in DeutscheBauZeitschrift, (1) 2017, Bauverlag BV GmbH, Gütersloh, pp. 77-79. (ISSN 0011-4782)
2016  
W245 Yoon, S.M.: 2016, Landesgartenschau Exhibition Hall, in Architecture & Culture Magazine, No. 417 (Wood Structure). Seoul, Korea: A&C Publishing, pp. 104-111. (ISSN 1227-0903)
W244 Yu, Y.: 2016, Landesgartenschau Exhibition Hall, in Wooden Building: Creative Wooden Structure, Phoenix Publishing, China, pp. 290-293. (ISBN 978-7-5537-5439-0)
W243 Boße, A.: 2016, Bau erfindetsich neu, In Karriereführer bauingenieure 2016.2017, vol. 11.2016-10.2017, Das Jobmagazin für Hochschulabsolventen, PP. 8-14. (ISSN: 1864-6344)
W242 Doll, N., Bredekamp, H., Schäffner, W.: 2016, Katalog, In N. Doll, H. Bredekamp, W. Schäffner (Eds.): +ultra. Gestaltung schafft wissen. Leipzig, Leipzig: E.A. Seemann, pp. 212–272. (ISBN: 9783865023780)
W241 Höfler, C.: 2016, Grow|Degrow. Materialwerdung zwischen Exzess und Kalkül, In N. Doll, H. Bredekamp, W. Schäffner (Eds.): +ultra. Gestaltung schafft wissen. Leipzig, Leipzig: E.A. Seemann, pp. 197–204. (ISBN: 9783865023780)
W240 Reichert, S.: 2016, ICD/ITKE Research Pavilion 2015-16, in Revue Technique Luxembourgeoise, HENGEN Print & More , Luxembourg, 02.2016, pp. 42-43. (ISSN 0035-4260)
W239 Baus, U.: 2016, Robotergesteuertes Nähen: Forschungspavillon 2016 des ICD/ITKE in Stuttgart, in Architektur Aktuell, 07-08.2016, Architektur Aktuell GmbH, Wien, pp. 6-8. (ISSN 0570-6602)
W238 De Groot, H.: 2016, Natura constructionis magistra, in Het Hout Blad, 08.2016, MYbusinessmedia, Deventer, pp. 24-30. (ISSN 0923-5574)
W237 Müller, R.: 2016, Forstpavillon, in Müllerblaustein magazin, Ausgabe 2, müllerblaustein Holzbau GmbH, Blaustein, pp. 42-51.
W236 Piasecki, M.: 2016, Architektura i nowe technologie, in Architektura-murator, 10.2016, No. 265, Wydawca, Warsaw, p. 38. (ISSN 1232-6372)
W235 Wieckhorst, T.: 2016, Genäht und verbunden: Holzpavillon an der Universität Stuttgart, in dach + holzbau, 10-11.2016, Bauverlag BV GmbH, Gütersloh, p. 6. (ISSN 0173-5365)
W234 Wright, H.: 2016, Inspiriert von der Natur, Jaguar Magazine, the Design issue, pp. 66-67.
W233 Toyoda, K.: 2016, Computational City, Wired, vol. 24, pp. 60-69.
W232 W Fok, W., Picon, A.: 2016, The Ownership Revolution, in W. W Fok, A. Picon (Eds.), AD: Digital Property: Open-Source Architecture 05/vol 86, London: Wiley; pp. 6-15. (ISBN: 978-1-118-95498-0)
W231 Burry, M., Burry, J.: 2016, Prototyping the process, in Prototyping for Architects, London: Thames & Hudson, pp. 134-135. (ISBN: 978-0-500-34305-0)
W230 Li, M.: 2016, ICD/ITKE Research Pavilion 2014-15, in Landscape Record, Vol. 2, 4.2016, International Book Publishing Center Liaoning Science and Technology Publishing House, Shenyang, China, pp.92-99. (ISSN 2325-3339)
W229 Stephan, P.: 2016, Zu bestaunen, in AIT, 6.2016, Verlagsanstalt Alexander Koch GmbH, Leinfelden-Echterdingen, p. 12. (ISSN 0173-8046)
W228 Bauland, D.: 2016, Verzinkt und zugenäht, in Wir Holzbauer, 5.2016, Pro Holzbau Schweiz GmbH, Zürich, p. 4. (ISSN 2296-486X)
W227 Tzscherlich, S.: 2016, ICD/ITKE Forschungspavillon, in Holztechnologie, 4/2016, Institut für Holztechnologie Dresden gemeinnützige GmbH, Dresden, pp. 62. (ISSN 0018-388111)
W226 Centgraf, S.: 2016, Forschungspavillon, in Deutsche BauZeitschrift, 7/2016, Ulrike Sengmüller und Bauverlag BV GmbH, Köln, pp. 9. (ISSN 0721-1902)
W225 Ruhnau, D.: 2016, Seeigel 4.0, in deutsche bauzeitung, 7-8.2016, Konradin Medien GmbH, Leinfelden-Echterdingen, pp. 74-75. (ISSN 0721-1902)
W224 Ettinger-Brinckmann, B.: 2016, Holz vernähen, in Deutsches Architektenblatt, 7.2016, planet c GmbH, Düsseldorf, p. 8. (ISSN 0012-1215)
W223 Lanz, K.: 2016, Mit Nadel & Faden, in Holzbau Austria, 4/2016 , Österreichischer Agrarverlag Druck und Verlags GmbH, Wien, pp. 36-43. (ISSN 0944-5749)
W222 Dauner, C. M.: 2016, Forschungpavillon in der Form eines Seeigels, in Mikado, 7.2016 Juli, WEKA MEDIA GmbH, Berlin, p.8. (ISSN 0944-5749)
W221 Reischer, P.: 2016, Die Natur bildet den Raum, in Architektur Fachmagazin, Mai/Juni 2016 04, Laser Verlag GmbH, Perchtoldsdorf, pp. 24-25. (ISSN 1606-4550)
W220 Uje, L.: 2016, ICD / ITKE Research Pavilion 2015 – 2016, in C3, 383, C3 publishing company, Seoul, pp. 22-31. (ISSN 2092-5190)
W219 Eichhorn, T.: 2016, Wo Architektur Neu Erfunden Wird, Schöner Wohnen-Haus & Bauen, Aug. 2016, p. 37.
W218 Korbmacher, T. : 2016, Images Publishing, bmxRider, No. 21, Jan. 2016, pp. 66-67, cover.
W217 Nave, K.: 2016, Spinning a web on the fly, Wired, Jun. 2016, p. 43.
W216 Cardno, C. A.: 2016, London museum to host robot-fabricated pavilion, Civil Engineering, Mar. 2016, pp. 32-33.
W215 Kapuste, P.: 2016, Neuste Technik für ein altes Material, Competition, Aug. 15, pp. 26-27
W214 Images Publishing: 2016, HygroSkin, in Smart Landscape, Images Publishing Group, Mulgrave. (ISBN 1864706570)
2015  
W213 Sack, F.: 2016, ICD/ITKE Research Pavilion 2011, in Open House 2, jovis Verlag GmbH, Berlin, p. 20. (ISBN: 978-3-86859-393-8)
W212 Markillie. P.: 2015, Knit me a car: Technology Quarterly on New Materials, in The Economist, December 5th- 11th p 13.
W211 Stephan, P.: 2015, Liebe Bedenkentrage: Forschungs-Pavillon , AIT, August, p 14.
W210 Hottmann, A.: 2015, Die natur als vorbild , deutsch bauzeitung, 09/2015, p. 7. (ISSN: 0721- 1902)
W209 Seon-min, Y.: 2015, ICD/ ITKE Research Pavilion 2014- 15 , Architecture and Culture, no. 412., September pp 34 – 37. (ISSN: 1227- 0903).
W208 Bauer, R. :2015, ICD/ ITKE Research Pavilion Stuttgart , Bauwelt Vol. 106, No. 30/2015, Bauverlag BV GmbH, pp 33.(ISSN: 0005-6855)
W207 Mika, O. :2015, Experimentalni pavilion z EDFE membrany vyzuzene uhlikovymi , Materialy pro stavbu, July 2015, pp 48 – 49.
W206 Welbergen, C. :2015, Architektur frei nach der nature, Domus, November/ December 2015, pp. 130 -131. (ISSN 2195 – 7681)
W205 Waltraut, H., Gruber, P. :2015, Plan Not to Plan Anymore — on Growing and Building, in Imhof, B., Gruber, P. (eds.), Built to Grow-Blending Architecture and Biology, pp. 31. (ISBN 978-3035609202)
W204 Raschke, C.: 2015, Digitale Schale, in Xpertise, 1/2015 (Beilage zum Deutschen Architektenblatt), Corps-Verlag, Düsseldorf, pp. 8-11.
W203 van Uffelen, C.: 2015, Landesgartenschau Exhibition Hall, in Blob!: Round Shapes, Fluid Forms, Braun Publishing, Salenstein, Switzerland, pp. 60-63
W202 Dubet, A., Kaoru, U.: 2015, Carnet de tendences: Hall d’exposition au Landesgartenschau, in L’Architecture d’Aujourd’hui, No. 409 (Nov 2015), pp. 134-135. (ISSN: 0003-8695)
W201 Greve, N.: 2015, Innovation und Kreation, in casamia, 2/2015, p. 25.
W200 Brownell, B: 2015, Botanical Biosphere, in Hypernatural: Architecture’s New Relationship with Nature,  Princeton Architectural Press, Princeton, pp. 122-123. (ISSN 1616892722)
W199 Schreiber, S.: 2015, Holzbaupreis Baden-Württemberg 2015, in Informationsdienst Holz, Juni 2015, Landesbetrieb ForstBW, Stuttgart, pp. 12.
W198 Reutter, S.: 2015, Spritzbeton, Welt am Sonntag, No. 40/2015, 04.10.2015, p. 86.
W197 Parlac, V.: 2015, Material as Mechanism in Agile Spaces, in Building Dynamics: Exploring architecture of change, Routledge, Abingdon, Oxon, New York, NY, pp. 177–190. (ISBN  978-1138791015)
W196 Sayah, A.: 2015, Mach es wie die Wasserspinne, in Stuttgarter Zeitung, No. 189, 18 August 2015, p. 27.
W195 Lange, S.: 2015, Forschungsprojekt “Robotik im Holzbau”, in Architektur Exklusiv Lifestyle, Mai / Juni 2015, Premium Medien, Frankfurt, pp. 88-89. (ISSN 2190-1554)
W194 Deutsch-Dabernig, B., Köhler-Kroath, N.: 2015, Schlau Bauen: Das Architekturbuch für kleine und große Handwerker, Neuer Umschau Buchverlag, Neustadt, p. 57. (ISBN 978-3865287526)
W193 Reitberger, M.: 2015, Die Grenzen der Geschicklichkeit, in holzbau austria, 4/2015, pp. 12-21
W192 Hintermayr, V. S.: 2015, Architektonisch inspiriert von der Wasserspinne,  in Stuttgarter Zeitung, No. 140, 22 June 2015.
W191 Euler, S.: 2015, Holz zu Holz, in Trockenbau Akustik, 5/2015, pp. 26-27
W190 Gabriel, A.: 2015, Advancing Wood Architecture – neue Möglichkeiten digital gesteuerter Produktion im Holzbau, in Detail, 6/2015, pp. 560-61
W189 Euler, S.: 2015, Forstpavillon hat Kern aus Holzfaserplatten, in Allgemeine Bauzeitung, 14/2015, p. 18.
W188 Stattmann, N. & Assaf, S.: 2015, Masche für Masche, Faser für Faser. Textile Vielfalt und ihre Charakteristika, in Domus, No, 11 (Jan./Feb.), pp. 134-141. (2195-7681)
W187 Park, J.: 2015, Landesgartenschau Exhibition Hall, Schwäbisch Gmünd, in Interiors, No. 343, 4/2015, Korea, pp. 228-233.
W186 Tröster, C.: 2015, Der Flora und Fauna abgeschaut, in Architektur & Wohnen, 2/2015, Hamburg, pp. 138-148. (ISSN 0171-7928)
W185 Bentzel, J.: 2015, Moderna konstruktioner med oändliga möjligheter, in Trä!, 28(1) , Stockholm, pp. 18-24. (ISSN 2001-2322)
W184 da Conceição van Nieuwenhuizen, J.B.: 2015, Natuurlijk licht van gewicht, in Innovatiecatalogus 2015, pp. 16-19.
W183 Hubert. R., Ohlhorst, F.: 2015, Carbon-Kanon: Fasern aus Kohlenstoff erobern die Designszene, in Places of Spirit, Feb./Mar., Germany, pp.32-37.
W182 Koch, K.: 2015, Bio-Logik, in Holzbau Magazin, März 2015, DRW-Verlag, Leinfelden-Echterdingen, pp. 42-47. (ISSN 0018-3792)
W181 Naboni, R., & Paoletti, I.: 2015, Advanced Customization, in Architectural Design and Construction. PoliMI Springer Briefs, pp.46-48.
2014  
W180 Neumann, O.: 2014, Technology, Context and Science in Architecture, In International Journal of Architectural Computing (IJAC), Vol. 12, No. 2, pp. 179-198. (DOI: 10.1260/1475-472X.12.2.179)
W179 Takenaka, T., Okabe, A.: 2014, Do Robots Realize Computational Dream?, in GA Japan, No. 129, A.D.A. Edita Tokyo CO., Ltd, pp. 192-196. (ISBN: 978-4-87140-928-5)
W178 Knapp, K.: 2014, Interview Achim Menges, in Architectural Review Asia Pacific – AR 134 (April/May), p. 42.(ISSN 2200-243X)
W177 Ridder, I.: 2014, Ein Seeigel inspiriert Architekten, in Stuttgarter Zeitung, No. 134, 13 June 2014, p. 23.
W176 Khabazi, Z.: 2014, ICD – ITKE 2012 Research Pavilion University of Stuttgart, in igital Design Processes, Kasra Publisher, pp. 110-123. (ISBN 978-600-6509-18-1)
W175 Kahil, N. F.: 2014, Robotic Design: Humans and Machines Design in Harmony, in Curve Magazine, No. 21 (Aug/Sep), pp. 52-53.
W174 Werner, A.: 2014, Vom Seeigel “Sanddollar“ gelernt, in VISO, No. 6.2014, Docu Media, Rüschlikon, p. 60-70. (ISSN 1662-6044)
W173 Minssart, Y.: 2014, Marqueterie technologique, in Séquences Bois, No. 101 (10.2014), Pôle édition, Paris, pp. 18-21. (ISSN 1258-889X)
W172 Paunescu, I.: 2014, Networks, in Igloo: Habitat & Architecture, Nov., Romania, pp. 114-119.
W171 Menges, A.: 2014, HygroSkin – Meteorosensitive Pavilion, in Shaoqiang, W. (ed.), New Portable Architecture: Designing Mobile & Temporary Structures, Promopress, Spain. (ISBN 978-8415967231)
W170 König, N.: 2014, HygroSkin – Meteorosensitive Pavilion, in floh! Nr. 19/20, Domino Verlag, München, p. 3.
W169 Geyer, H.H, Mayer-Grenu, A.: 2014, Inspiriert und inspirierend, in Forschung Leben: Wissenschaft und Geld, Mar., Germany, pp. 22-43.
W168 Sinn, R.: 2014, Nach dem Vorbild der Natur, in dach+holzbau, No. 6.2014, Bauverlag, Güthersloh, p. 4. (ISSN 0173-5365)
W167 Shim, J.M.: 2014, Gradually Embracing Digital Fabrication Demanded by the Times, in Space: Envisaging the Reality of Digital Fabrication, No. 562 Sept., South Korea, pp. 54-71. (ISSN: 1228-2472)
W166 Hübener, S.: 2014, Käferschale Schützt Menschen, in TECH21: Schweizerische Bauzeitung, No. 34 Aug. , Switzerland, pp. 30-33.
W165 Heung Chae, J.: 2014, ICD/ITKE Research Pavilion 2013-14, in DETAILS, No. 37, A&C Publishing Co., Ltd., Seoul, Korea, pp. 170-173. (ISBN: 978-89-7212-155-8)
W164 Bialobrzeski, A.: 2014, Biomimetyka w architekturze, in Architektury, No. 7 (47), Poland, pp. 62-96. (ISSN 2801-6413)
W163 Reischer, P.: 2014, Temporäre Bauten, in Architektur Fachmagazin, No. 6 Sep./Oct. , Austria, pp. 80-83. (ISSN 1606-4550)
W162 Busmann, J.: 2014, HygroSkin, in build – urban architecture and design, Verlag Müller + Busmann, Wuppertal, p. 15. (IISN 1619-3512)
W161 Heung Chae, J.: 2014, HygroSkin, in DETAILS, No. 36, A&C Publishing Co., Ltd., Seoul, Korea, pp. 166-169.
W160 Gosztonyi, S.: 2014, Blick hinter die Fassade, in Energie:Bau, 06/2014, Starmühler Werbeagentur & Verlag GmbH, Wien, p. 25.
W159 Fernández-Galiano, L.: 2014, Light Timber Structures, in AV proyectos, No. 66, Madrid, pp. 38-39. (ISSN 1697-493X)
W158 Gutai, M.: 2014, Embedded Responsiveness – Hygro skin pavilion, in Trans structures. Fluid architecture and liquid engineering, Actar Publisher pp. 128-131. (ISBN 978-1-940291-44-4)
W157 Gutai, M.: 2014, Inmade Smartness – Interview with Prof. Achim Menges, in Trans structures. Fluid architecture and liquid engineering, Actar Publisher pp. 111-127. (ISBN 978-1-940291-44-4)
W156 Bunk, T.: 2014, Der Roboter war’s, in mikado, No. 8.2014, WEKA Media, Kissing, Germany. (ISSN 0944-5749)
W155 Architektenkammer Baden-Württemberg: 2014, Innovation und Ausblick, in Uralter Baustoff – zeitlos modern: Holzbau in Baden-Württemberg (Ausstellungskatalog), Stuttgart, pp. 3 & 41.
W154 Waligore, A.: 2014, Inland Sea, in Interior Design, Vol. 85, No. 13, New York, pp. 157-159. (ISSN 0020-5508)
W153 Perrot, R.: 2014, Der Sonne nach, in Wir Holzbauer, No. 1, März 1.2014, holzbauschweiz, Pro Holzbau Schweiz GmbH, Zürich, p. 4 (ISSN 2296-486X)
W152 Knippers, J., Helbig, T.: 2014, Das Prinzip Leichtbau und seine Bedeutung für das konstruktive Entwerfen, in Stahlbau, No. 8, Stahlbau, 83(11), pp. 777–783. (Online ISSN 1437-1049)
W151 Mentegazzi, E., Kuiken, J.: 2014, Behind Gridshells: Morphogenetic and parametric design strategies, in Bond van Nederlandse Architecten (BNA), Netherlands, pp. 76-87 & 94-101 (ISBN 978-94-6228-422-7)
W150 Mika, O.: 2014, Forstpavillon ve Švábském Gmündu, in Materiály pro stavbu, No. 8, Business Media CZ, Prague, Czech Republic, pp. 20-23 (ISSN 1213-0311)
W149 Stimpel, R.: 2014, Seeigel mit 7.600 Zinken, in Deutsches Architektenblatt, 2014(8), Bundesarchitektenkammer, Berlin, Germany, p. 8 (ISSN 0012-1215)
W148 Bruderverlag, Carlisle Construction Materials: 2014, Vielfalt EPDM-Abdichtungen, in Bauen mit Holz Spezial, Band 3, Bruderverlag, Köln, Germany.
W147 Petzold, A.: 2014, Und warum klopfen wir auf Holz?, in Stern, No. 38, 11. September, p. 140 (ISSN 0039-1239)
W146 Smisek, P.: 2014, ICD computes with plywood, in MARK, No. 52, 2014(10/11), Frame Publishers, Amsterdam, NL, p. 40 (ISSN 1574-6453)
W145 AIT: 2014, Forschungsprojekt, in Architektur, Innenarchitektur, Technischer Ausbau, 2014(7/8), Verlagsanstalt Alexander Koch, Leinfelden-Echterdingen, Germany, p. 15 (ISSN 0173-8046)
W144 Brownell, B.: 2014, Detail: Landesgartenschau Exhibition Hall, in Architect, 2014(8), Hanley Wood, Washington, DC, pp. 22 (ISSN 1935-7001)
W143 Euler, S.: 2014, 3D-Puzzle aus Mehrschichtplatten, in Bauen mit Holz, 2014(9), Bruderverlag, Köln, Germany, pp. 24-27 (ISSN 0005-6545)
W142 Darstein-Ebner, I.: 2014, Digital geplant, Robotisch gefertigt, in Deutsche Bauzeitung, 2014(9), Konradin Medien GmbH, Leinfelden-Echterdingen, Germany, pp. 78-81 (ISSN 0721-1902)
W141 Krieg, O. Menges, A.: 2014, Digitaler Holzbau, in zuschnitt 53 -Zeitschrift über Holz als Werkstoff und Werke in Holz,  Nr. 53 März 2014, proHolz Austria, Wien, p. 24. (ISSN 1608-9642, ISBN978-3-902926-04-3)
W140 Fischer W.: 2014, Ein Holzhaus völlig neuer Art, in Gmünder Tagespost, 24.04.2017, p. 9.
W139 Brüggemann, M.: 2014, HygroSkin – Dieses Haus atmet…, in natur – Das Magazin für Natur, Umwelt und besseres Leben, Juni 2014, Leinfelden-Echterdingen, pp. 76-80. (ISSN 0723-5038)
W138 Mayer-Grenu, A.: 2014, Automatisierung des Individuellen, in Forschung Leben – Digitale Gesellschaft, Das Magazin der Universität Stuttgart, 02/2014, Krüger Druck+ Verlag Merzig, Universität Stuttgart, pp. 66-69.
W137 Menges, A.: 2014, Von konstruktiver Rationalisierung zum informierten Entwerfen, in zuschnitt 53 -Zeitschrift über Holz als Werkstoff und Werke in Holz,  Nr. 53 März 2014, proHolz Austria, Wien, pp. 16-17, 22, 24. (ISSN 1608-9642, ISBN978-3-902926-04-3)
W136 Gauzin-Müller, D.: 2014, Architecture vivant, in EK-Villes en transition architectures durables, Nr.38 April/Mai 2014, Société éditrice-À vivre éditions, Paris, p. 10. (ISSN 2265-8858)
W135 Barberio, M.: 2014, Nuovi strumenti per la produzione architettonica, in Fallacara, G., Stigliano, M., (eds.), New Fundamentals of Natural Architecture, pp. 60-65. (ISBN 978-88-548-7087-1)
W134 ICD/ITKE: 2014, ICD/ITKE Research Pavilion 2011, in Top Space & Art IV, Artpower International Publishing Co., Shenzhen, China, 2014, pp. 196-201. (ISBN 978-988-68243-1-3)
W133 ICD/ITKE: 2014, ICD/ITKE Research Pavilion 2010, in Top Space & Art IV, Artpower International Publishing Co., Shenzhen, China, 2014, pp. 190-195. (ISBN 978-988-68243-1-3)
W132 Stuttgarter Unikurier, Das Besondere Bild, 107, 1/2011, p. 96.
W131 Kraft B.: 2014, Baukulturelle Wandlung in Sicht, in DBZ Deutsche Bauzeitschrift. No. 04 / 2014, p. 14-15 (ISSN 0011-4782)
W130 AFBW : 2014, Institut für Computerbasiertes Entwerfen (ICD), in Möller, U., Vogl, A. (Eds.) Kompetenzatlas für Faserbasierte Werkstoffe, Allianz Faserbasierter Werkstoffe Baden-Würtetemberg e.V., Ostfildern, pp. 166-167
W129 ICD/ITKE : 2014, Inspired by Nature, in Fesseler L., Haver, I. (Eds.) Überleben – a lifelong journey, State Academy of Art an Design, Stuttgart, pp. 86-91. (ISBN: 978-3-942144-26-1)
W128 Hübner, S.: 2014, Häuser wie Hummer, in Deutsches Architektenblatt, Bundesarchitektenkammer, Berlin, Germany, 2014(3), pp. 30-34. (ISSN 0012-1215)
W127 Prieto, E.: 2014, Innovation – Meteorosensitive Pavilion, in Arquitectura Viva, Nr. 159 1/2014, pp. 93. (ISSN: 0214- 1256)
W126 Prieto, E.: 2014, Madre madera – Wood, the Return of a Timeless Material, in Arquitectura Viva, Nr. 159 1/2014, pp. 72-75. (ISSN: 0214- 1256)
W125 Striebel, J.: 2014, Robotertechnik für einen Pavillon, in Südwest Presse, 30 Jan 2014, p. 23.
W124 Schulze, R.: 2014, Schaufenster für neue Architektur, in Frankfurter Allgemeine Zeitung, 8 Jan 2014, p. 35.
2013  
W123 Schayan, J.: 2013, Architektur auf Knopfdruck, in DE Magazin Deutschland , Nr. 4/2013, Frankfurter Societäts-Medien GmbH, Frankfurt, p.8. (ISSN 1617-9552)
W122 Menges, A.: 2013, Die Zukunft des Bauens – parametrische Designkonzepte, in Detail transfer: Weber, M., Pfeiffer, K., Sigmund, B. (eds.), Profile, Ausg. 11, Schüco International KG, Bielefeld, p.50.
W121 Mihaylov, B., Nicolova, V., Pelzer, M., Rosemann, C.: Complex Tensile Surface Morphologies, Krieg, O.: Connecting Intelligence, Ko, B. S.: 2013, Wood Laminate Morphologies, in Weiguo, X., Leach, N. (eds.), Design Intelligence, China architecture & building press, pp. 152-157. (ISBN 978-7-112-15842-3)
W120 Reischer, P.: 2013, HygroSkin – Meteorosensitiver Pavillon, in Laser, W., Architektur Fachmagazin, Effizient Bauen, Nov. 2013, Laser Verlag GmbH, Perchtholdsdorf, pp. 66-69. (ISSN 1606-4550)
W119 Klein, S.: 2013, Den Tragwerken der Natur auf der Spur, in Holz-Zentralblatt, 29 Nov 2013, p. 1192.
W118 Abeledo, G., Di Peco M.: 2013, Bioticos Estelares, in Diez, F. (ed.), Summa+ , Casas y pabellones Nr. 133, Decembro 2013, pp. 82-87 (ISSN 0327-9022)
W117 Nachtigall, W., Pohl, G.: 2013, Bau-Bionik, Natur – Analogien – Technik, 2., neu bearb. und erw. Aufl., Springer-Vieweg, Heidelberg, pp. 38-39, pp.184-185, pp.192-193, pp.216-217, pp.222-223, pp.234-235. (ISBN 978-3-540-88994-6, ISBN 978-3-540-88995-3 (eBook), DOI 10.1007/978-3-540-88995-3)
W116 Menges, A.: 2013, HygroScope, in Mayer, H., Dreher, F., Sommer, K., Strunden, P., (eds.) archithese, Natur/ Nature Nr. 6.2013, bsmediagroup, Zürich, pp.66-67 Centerfold. (ISBN: 978-3-7212-0885-6)
W115 Brayer, M., Migayrou, F.: 2013, Achim Menges, in Naturaliser l’Architecture, Archilab 2013(8), Orléans, France, pp. 222-225. (ISBN 978-2-910385-82-8)
W114 Beautyman M.: 2013, Lobster tale, Crustaceans offer an object lesson at the Universität Stuttgart in Germany, in Allen, C., Interior Design Vol. 84, No.8, Interior Design Media Group, New York, pp. 141-143. (ISSN 0020-5508)
W113 Walker, S.: 2013, It`s alive, in Osborne, C., (ed.), Azure Magazine, Azure Publishing Inc., Toronto, Canada, Vol.29, No. 226, p.80. (ISSN 0829-982X)
W112 Elys, J.: 2013, CAD Fundamentals for Interior and Architecture, Laurence King Publishing Ltd, London, p. 60. (ISBN 9781780672823)
W111 Guillaume, V.: 2013, Presentation – Enjeux et perspectives de recherché sur le design et la prospective industrielle, Les Cahiers du Musee national d’art modern, Centre Pompidou, 123/2013, pp. 8-9. (ISBN 978-2844266088)
W110 Turk, V.: 2013, Gimme shellfish shelter, Wired Magazine, No. 07//2013, pp. 24-15. (ISSN 0011-9571)
W109 Wachs, ME: 2013, You have to be inspired… by science, in Leydecker, S (ed), Innenräume entwerfen: Konzept, Typologie, Material, Konstruktion, Birkhäusser, Basel, pp. 115-116 (ISBN-13: 978-3034615792)
W108 Jodido, P: 2013, ICD / ITKE Research Pavilion 2011, in Wood Architecture Now! 2, Taschen GmbH, Köln, pp. 194-199. (ISBN 978-3-8365-3593-9)
W107 Elser, O.: 2013, Lieber Rechner, rechne mir, in Architectural Digest, Condé Nast Verlag GmbH, München, 2013(7), pp. 70-73. (ISSN 1433-1764)
W106 Rangel, A: 2013, El Armazón Mutante, in Velvet, Grupo Editorial On Time, Caracas, Venezuela, 5(21), pp. 68-70.
W105 Kaltenbach, F.: 2013, Winding Instead of Weaving – A Robotically Fabricated Pavilion Consisting of Glass Fibres and Carbon Fibres, Detail Vol. 53 No. 03/2013, pp. 176-178. (ISSN 0011-9571)
W104 Pestalozzi, M.: 2013, Schutz für Da Vincis Turm, Architektur Technik, Vol. 36 No. 04/2013, pp. 58-59.
W103 Marsiske, H.: 2013, Roboter bauen nach dem Vorbild der Natur, Stuttgarter Zeitung, 21 Jan 2013, p. 14.
W102 Peters, B., Peters, T.: 2013, Inside Smartgeometry – Expanding the Architectural Possibilities of Computational Design, Wiley, London, pp. 6-7. (ISBN 978-1118522462)
W101 Martins, A.: 2013, ICD and ITKE learn from the lobster, MARK Magazine, No. 04-05/2013, pp. 48-49. (ISSN: 1574-6453)
W100 Laser, W.: 2013: Krebsschalen, Architektur Fachmagazin, No. 02-03/2013, pp. 22-23. (ISSN 1606-4550)
W099 Stavric, M., Sidanin, P., Tepavcevic, B.: 2013, Architectural Scale Models in the Digital Age, Springer, Vienna, New York, pp. 116-117. (ISBN 978-3709114476)
W098 Glasner, B., Ott, S.: 2013, Wonder Wood: Holz in Design, Architektur und Kunst, Birkhäuser, Basel, pp. 132-135 and pp. 202-203. (ISBN 978-3-0346-0673-8)
W097 Hübener, S.: 2013, Gewickelter Faserverbundpavillon, TEC21 Wenn Roboter Bauen, No. 15-16/2013, pp. 22-25. (ISSN 1424 800X)
W096 Mueller, C.: 2013, Wenn aus Hummern Architektur wird, Baumeister, No. 04/2013, p. 41. (ISSN 4-194-673-015-006)
W095 Sauer, C.: 2013, Biomimetisch Gewickelt, MD Interior Design Architecture, No.03/2013, pp. 72-74. (ISSN 0343-0642)
W094 Carpo, M.: 2013, The Ebb and Flow of Digital Innovation – From Form Making to Form Finding and Beyond, Architectural Design, Vol. 83 No. 1, Wiley Academy, London. pp. 56-61. (ISBN: 978 1119-978657)
W093 Kaltenbach, F., Pawlitschko, R.: 2013, Transparency, Translucence – Developments in Construction Materials, Detail, 53. Serie 2013, 1/2 Transparent und Transluzent, pp. 74-84. (ISSN 0011-9571)
W092 Sauer, C.: 2013, Biomimetisch Gewickelt, MD Interior Design Architecture, No.03/2013, pp. 72-74. (ISSN 0343-0642)
2012  
W091 Corti, C., Soria, S.: 2012, Inventos Espacials, ICD/ITKE, Summa+ , 125, Novembro 2012, pp. 94-103 (ISSN 1853-242X)
W090 Valk, V.: 2012, Materjali tehe, protoarhitektuur ja teised onnelikud juhused, SIRP Eesti Kultuurileht, No. 44(3418)/2012, p.10. (ISSN 0134-4579)
W089 Knippers, J.: 2012, Von der Konstruktion des Bauwerks zur Gestaltung der Prozesse, Detail, No. 10/2012, pp. 1142-1148. (ISSN: 0011-9571)
W088 Beorkrem, C.: 2012, Material Strategies in Digital Fabrication, Routledge, New York, pp.46-51. (ISBN: 978-0-415533669)
W087 Beorkrem, C.: 2012, Material Strategies in Digital Fabrication, Routledge, New York, pp.58-63. (ISBN: 978-0-415533669)
W086 Klanten R, Ehmann S, Borges S, Feireiss L .: 2012, Going Public, Public Architecture, Urbanism and Interventions, pp. 34-35. (ISBN-13: 978-3899554403)
W085 Durand, B.: 2012, En attendant le futur, Architectures Avivre, No. 67, p. 20. (ISSN: 1625-7456)
W084 Pfäffinger, J.: 2012, Die Eleganz des Stuttgarter Seeigels, Baumeister, No.7/2012, p. 89. (ISSN: 0005-674X)
W083 Fernández-Galiano, L.: 2012, Analogías orgánicas, Arquitectura Viva, No. 141, pp. 50-51. (ISSN: 0214-1256)
W082 Yu Mi, H.: 2012, Process: ICD/ITKE Research Pavilion 2011, C3 Architecture-Landscape-Urbanism Vol. 27 No. 328 / 2012, pp. 32-37. (ISSN: 2092-5190)
W081 Knippers, J.: 2012, Integrale Planung – Entwerfen und Konstruieren im digitalen Prozess, in Ingenieurbaukunst – Made in Germany 2012/2013, Junius Verlag, Hanburg, pp. 136-141 (ISBN 978-3-88506-499-2)
W080 Knippers, J.: 2012, Von Seeigeln und Strelitzien, DB Deutsche Bauszeitung, No. 3/2012, pp. 64-67. (ISSN: 0721-1902)
W079 Dauner, C. M.: 2012, Vom Seeigel lernen, Mikado, No. 1-2.2012, p. 8.
W078 Gray, D.: 2012, Forschungspavillon ICD/ITKE, 2011 European Union Prize for Contemporary Architecture, Mies van der Rohe Award, pp. 180-183. (ISBN: 978-84-92861-76-7)
W077 Kaltenbach, F.: 2012, Primitive Hut of the Future? Bionic Research Pavilion in Wood, Detail English Edition, No. 2/2012, pp. 118-119. (ISSN: 1614-4600)
2011  
W076 Steele, B., Gonzalez de Canales, F.: 2011, Net Works: An Atlas of Connective and Distributive Intelligence in Architecture, AA Publications, London. (ISBN 978-1907896149).
W075 Lukas, M.-H.: 2011, ICD/ITKE Forschungspavillon 2011, Adato, No. 3/2011, p. 36-39.
W074 Kaltenbach, F.: 2012, Urhütte der Zukunft? Bionischer Forschungspavillon aus Holz, Detail, No. 1+2/2012, pp. 5-8. (ISSN: 0011-9571)
W073 Schreck-Offermann, U.: 2011, Bauen nach bionischem Vorbild, Building Research Summaries Journal, Vol. 52 No. 6/2011, p. 7. (ISSN: 0177-3550)
W072 Kraft, B.: 2011, Klima-Reaktor „FAZ Sommer-Pavillon“, DBZ Deutsche Bauzeitschrift, No.12 / 2011, pp. 22-24. (ISSN: 0947 9430)
W071 Pestalozzi, M.: 2011, Praxis in der Forschung II, Architektur-Technik, Vol. 34 No. 11/2011, pp. 106-107.
W070 Pawlyn, M.: 2011, Biomimicry in Architecture, RIBA Publishing, London, p.47. (ISBN: 978-1859463758)
W069 Wilke, C.: 2011, Efeu, Spinnennetz und Fliegenei – die Natur als Entwickler, Bauwelt Vol. 102, No. 31/2011, pp. 26-31. (ISSN: 0005-6855)
W068 Burry, M.: 2011, Scripting Cultures – Architectural Design and Programming, Wiley, London, pp. 40-42. (ISBN: 978-0470746417)
W067 Burry, J., Burry, M.: 2011, The New Mathematics of Architecture, Thames & Hudson, London, pp. 68-71. (ISBN: 978-0500342640)
W066 Lienhard, J. Fleischmann, M., Dsouza, D., Schleicher, S. : 2011, Biegung erwünscht, Bauen mit Holz – Fachzeitschrift für Konstrukteure, No.02 / 2011, pp. 30-34. (ISSN: 005 6545)
W065 Koch, K.: 2011, Feinarbeit, Holzbau Magazin, Vol. 16 No. 3 / 2011, pp. 34-37.
W064 Gunsser, C.: 2011, Flechtwerk, Baumeister, Vol. 108 No. B1 2011, p. 9. (ISSN: 0005-674X)
W063 Jacob-Freitag, S.: 2011, Experiment mit Spannung, Mikado – Unternehmermagazin für Holzbau, No.01-02 / 2011, pp. 26-29. (ISSN: 0944 5749)
W062 Brandt, T.: 2011, Jahrzehnt der Nachhaltigkeit, Berliner Zeitung – Immobilien, No.52 / 2.1.2011, pp. 2-3.
2010  
W061 Ruby, A., Ruby, I.: Re-Inventing Construction, Ruby Press, Berlin, 2010, p. 239. (ISBN: 978-3981343625)
W060 Lane, T.: 2010, Isn’t it surprising? What you can do with a computer and some strips of 6.5mm plywood, Building Magazine, 01.10.2010, pp. 18-19.
W059 Herwig, O.: 2010, Schmelzkaeseberge und ein Aufmarsch von Amöben, Sueddeutsche Zeitung, 29.12.2010, p.13.
W058 Reischer, P.: 2010, Praxis in der Forschung, Architektur-Technik, Vol. 33 No.11/2010, pp. 120-121.
W057 Pestalozzi, M.: 2010, Ein Wesen aus Sperrholz, Architektur Fachmagazin, No. 7 Oct. 2010, p. 16. (ISSN: 1606-4550)
W056 Schreck-Offermann, U.: 2010, Innovativer Bau an der Uni Stuttgart durch neuartige Entwurfsmethoden und Simulationen, Building Research Summaries Journal, Vol. 51 No. 5/2010, p. 7. (ISSN: 0177-3550)
W055 Tambornini, S.: 2010, Quintessential Design – Flexurally elastic structure in birch plywood, MD International Design Scout, No. 12/2010, pp. 16-19. (ISSN: 0343-0642)
W054 Nuljsink, C.: 2010, Achim Menges and Jan Knippers use a little to make a lot, Mark, No. 29 Dec 2010, pp. 206-209. (ISSN 1574-6453)
W053 Kaltenbach, F.: 2010, Teaching by Doing – A Research Pavilion in Stuttgart, Detail (English Edition), Vol. 2010 No. 06, pp. 559-561. (ISSN: 1614-4600)
W052 Schroepfer, T.: 2010, Material Design, Birkhaeuser, Basel, pp. 171-176. (ISBN: 978-3034600354)
W051 Kaltenbach, F.: 2010, Teaching by Doing – Forschungspavillon in Stuttgart, Detail, Vol. 50 No. 10/2010, pp. 994-995. (ISSN: 0011-9571)
W050 Gunsser, C.: 2010, “Material ist teuer, Geometrie ist billig“, DB Deutsche Bauzeitung, Vol. 144 No.10 / 2010, pp. 70-71. (ISSN: 0721 1902)
W049 Langenbach, M.: 2010, Temporärer Pavillon aus Sperrholz, Bauen mit Holz – Fachzeitschrift für Konstrukteure, No.09 / 2010, pp. 8. (ISSN: 005 6545)
W048 Hartmann, G.: 2010, Futuristische Leichtigkeit, Mikado – Unternehmermagazin für Holzbau, No.09 / 2010, pp. 10. (ISSN: 0944 5749)
W047 Höfler, C.: 2010, Performanz der Form – Prozessorientiertes Entwerfen in der Architektur, in Avanessian, A., Hofmann, F. (eds.), Raum in den Künsten, Wilhelm Fink Verlag, Munich, 2010, pp. 195-206. (ISBN: 0978 3770546589)
W046 Weinbrenner, K.-H.: 2010, Selbsttragende Konstruktion aus Holz, Holz-Zentralblatt, Vol. 136 No. 30 / 2010, pp. 01.
W045 Grüssinger, B.: 2010, Pavillon spannt sich wie ein Flitzebogen, Stuttgarter Zeitung, No. 168 / 2010, pp. 24.
W044 Walliser, T.: 2010, Laptops in der Werkstatt / Notebooks in the Workshop, Detail, Vol. 50 No. 05/2010, pp. 438-440. (ISSN: 0011-9571)
W043 Sauer, C.: 2010, Made Of…: New Materials Sourcebook for Architecture and Design, Gestalten Verlag, Berlin, pp. 36, 186-187. (ISBN: 978-3899552935)
W042 Wegenroth, S.: 2010, Virtual World, Technicity – Magazin für Innovation, Technologie, Mobilität, No. 01/2010, pp.92-93. (ISSN: 2190-0515)
2009  
W041 Liu, Y.-T., M., Lim, C.-K. (eds.): 2009, New Tectonics – Towards a New Theory of Digital Architecture, Birkhäuser, Basel, pp. 118-125. (ISBN 978-3764386917)
W040 Yazici, S.: 2009, Yenilikçi Malzeme Sistemleri, Mimarlikta Malzeme, Vol. 04 No. 14, pp. 42-48. (ISSN 13066501)
W039 Foges, C.: 2009, Architectural Association at Ecobuild, EcoTech – Sustainable Architecture, No.19 02/2009, pp. 26-27. (ISSN 14745054)
W038 Morris, R.: 2009, Fundamentals of Product Design, AVA Academia Press, Lausanne, pp. 146-147. (ISBN 978-2940373178)
W037 Schettler, U.: 2009, Diskurs: Das Ornament als Versprechen, AIT Magazine, No. 3/2009, pp. 76-79. (ISSN: 01738046)
2008  
W036 Leach, N., Weiguo, X. (eds): 2008, (Im)material Processes: New Digital Techniques for Architecture, China Architecture and Building Press, Beijing, pp. 176-179. (ISBN 978-7112103959)
W035 Grobman, Y., Neuman, E. (eds): 2008, Performalism: Form and Performance in Digital Architecture, Tel Aviv Museum of Art Publications, Tel Aviv, pp.98-105. (ISBN 978-9657161739)
W034 Jaeschke, A.: 2008, Environmental Intensifiers, Architectural Design, Vol.78 No. 2, pp. 88-95 (ISBN: 978-0470516874)
W033 Hensel, M., Sunguroglu, D.: 2008, Performance Oriented Design / Nesnenin Cevresiyle Kurdugu Iliski, XXI Architecture and Design, No. 4/2008, pp. 10-14. (ISSN: 13039598)
W032 Rosanzky, K.: 2008, Sitzlandschaft, Deutsche Bauzeitung, No. 03/2008, pp.110 (ISSN: 00114782)
W031 Hensel, M., Sunguroglu, D.: 2008, Architecture as Adventure / Karmafianin Basitligi, XXI Architecture and Design, No. 5/2007, pp. 74-78. (ISSN: 13039598)
2007  
W030 Burke, A., Tierney, T. (eds): 2007, Network Practices: New Strategies in Architecture and Design, Princeton Architectural Press, Princeton, pp. 95. (ISBN 978-1568987019)
W029 Kritzler, H.: 2007, Lounge Landscape, Workshop Magazine, No. 12/2007, pp.18 (ISSN: 0934-585X)
W028 Metzger, R.: 2007, Lounge Landscape, Materialica Journal for Product Engineering, No.05/2007, pp. 56 (ISSN: 1865-3197)
W027 Horndasch, G., 2007, Material und Design, Material+Technik, No. 07/2007, pp. 34
W026 Furjan, H.: 2007, Cities of Complexity, in Abruzzo, E., Ellingsen, E. and Solomon, J.(eds.), 306090 Books Volume 11, 306090 Publishers, New York, pp. 52-63 (ISBN: 978-1-56898-734-7)
W025 Last, N.: 2007, From Exclusion to Incorporation: Formalism’s New Limits, MIT Publications Thresholds Magazine, No. 33.
2006  
W024 Hensel, M.: 2006, Evolving Synergy, Architectural Design, Vol. 76 No. 05, pp. 104-108. (ISBN 978-0470026526)
W023 Tierney, T.: 2006, Abstract Space: Beneath the Media Surface, Routledge, Abingdon, pp. 22-23 / 99-103. (ISBN 978-0415402002)
W022 Sousa, J. P.: 2006, A Tecnologia Digital e a Investigacao em Arquitectura, Arquitectura e Vida, No.69, pp. 22-27. (ISSN 10730135)
W021 Alison, J.: 2006, Future City – Experiment and Utopia in Architecture 1956-2006, Thames & Hudson, London, pp. 241. (ISBN 978-0500286517)
W021 Bates, A.: 2006, A Canopy, Icon Magazine, No. 07/2006, pp. 31. (ISSN 9771479945017)
2005  
W020 Adria, M., Campo Baeza, A., Forster, K., Hadid Z. (eds): 2005, 10x10_2: 100 Architects 10 Critics, Phaidon Press Limited, London, 2005, pp. 264-267 (ISBN: 0-7148-4441-1)
W019 Neumann, O.; 2005, The Influence of Digital Media on Architectural Education and Practice, Architecture and Ideas Magazine Vol. 5 No.1, pp. 4-17. (ISSN: 1205-7592)
W018 Stov Holt, M. (ed.): 2005, Blobjects and Beyond, Chronicle Books LLC, San Francisco, 2005, pp.170-191. (ISBN: 0811847659)
W017 Manfra, L.: 2005, Shape Shifter, Metropolis Magazine, No. 01/2005, pp. 32 (ISSN: 0279-4977)
2004  
W016 Hemberg, M., O’Reilly, U.-M.: 2004, Extending Grammatical Evolution to Evolve Digital Surfaces, Proceedings of Euro Genetic Programming Conference, Springer, Berlin, pp. 299-308. (ISBN 3540213465)
W015 Forster, K. W. (ed.): 2004, Metamorph Trajectories, Marsilio Editori, Venice, pp. 42 (ISBN 88-317-8533-8)
W014 Najle, C.: 2004, Hot Spot London, in Leach, N., Wei-Guo, X. (eds.), Fast Forward >> Hot Spot Brain Cells, Map Book Publishers, Hong Kong, pp. XX. (ISBN 962-86040-7-4)
W013 Yamasaki, I.: 2004, New Trends of Architecture, Fram Kitagawa, Tokyo, pp.26-29 (ISBN 4773804068)
W012 Lynn, G.: 2004, Constellations in Practice, PRAXIS: Journal of Writing and Building, No. 06/2004, pp.08-17. (ISBN 0-9703140-6-X)
W011 Hensel M.: 2004, OCEAN NORTH – Curvature Logic. Byggekunst 04/2004, pp. 16-29. (ISSN 0007-7518)
W010 Castle, H.: 2004, Emergence in Architecture, AA Files, No. 50, pp. 50-61. (ISBN 1-902902-33-5)
W009 Suzanne S., Luna I., Broadhurst R. (Eds): 2004, Imagining Ground Zero, Rizzoli, New York, pp. 138.
W008 Liu, Y. : 2004, Postagriculture, World Architecture Review, No. 94-95, pp. 110-115 (ISSN 1000-8373)
W007 Bosman, J.: 2004, Postagriculture, de Architect, No. 09/2004, pp. 18. (ISSN 0925-6830)
2003  
W006 Melvin, J.: 2003, It’s in the genes, The Architects Journal, No.7/2003, pp.78 (ISSN 00038466)
2002  
W005 Hensel, M.: 2002, Feed it Forward: An approach towards Time-based Design and Architecture of Change, Maja Estonian Architectural Review, No. 02/2002, Vol. 33, pp.19-21 (ISSN 1023-0742)
W004 Sotamaa, K.: 2002, Arkkitehtuurin Velhokoulu, Muoto Magazine, No. 03-04/2002, Vol. 20, pp. 62-65. (ISSN 48853993)
W003 Protetch, M.: 2002, A New World Trade Center, Harper Collins Publishers, New York, pp. 110-111. (ISBN 0-060520167)
W002 Kleis, B.: 2002, Landscape Playhouse, Arkitekten, No. 20/2002, Vol. 104., pp.33. (ISSN 0004-189x)
W001 Burkeman, O.: 2002, What architects believe should rise from the ashes of the World Trade Center site, The Guardian, 19.01.2002, pp. 5.